Sources Sought COBIA DD
Updated
A PDF document (166 KB) attached to Drydock: USCGC COBIA Dry Dock Availability FY2026, from the US Coast Guard. Due Nov 2, 2026, 4:00 PM (UTC-5).
File name: Sources Sought COBIA DD.pdf
The full file is for paid members, or buy this bid alone.
Preview
USCGC COBIA (WPB-87311) DRYDOCK AVAILABILITY FY2026
SOURCES SOUGHT NOTICE
USCGC COBIA (WPB 87331) DRYDOCK
70Z08026QPBPLCOBIADD
This is a SOURCES SOUGHT NOTICE not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.
REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, Norfolk, VA to identify sources capable of providing the following: SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform drydock repairs to the U.S. Coast Guard Cutter (USCGC) COBIA (WPB-87331). The vessel is home ported in Panama City, FL 32408. All work will be performed at the vessel’s contractor’s facility. There is no geographical restriction for this cutter. SCOPE OF WORK: The scope of the acquisition is for the drydock repairs of the USCGC OBIA (WPB-87331). This work will include, but is not limited to the following Work Items:
WORK ITEM 1: Structural Analysis, 3D Laser Scan, Perform WORK ITEM 2: Hull Plating (Side Scan), Ultrasonic Testing WORK ITEM 3: Ultrasonic Thickness Measurements, Perform WORK ITEM 4: U/W Body, Preserve, 100 percent
WORK ITEM 5: Hull Plating Freeboard, Preserve, 100 Percent WORK ITEM 6: Tank, Dirty Oil, Clean and Inspect
WORK ITEM 7: Tank, Oily Water, Clean and Inspect
WORK ITEM 8: Tanks, MP Fuel Service, Clean and Inspect
WORK ITEM 9: Decks, Exterior (Main Deck), Preserve
WORK ITEM 10: Superstructure, Preserve, 100%
WORK ITEM 11: Capastic Fairing, Depth Sounder, Renew
WORK ITEM 12: Watertight Closures, Assess
WORK ITEM 13: Mast, Preserve (“100%”) – Contractor Interference Removal WORK ITEM 14: Main Engine/Reduction Gear, Realign
WORK ITEM 15: Intermediate Water-Lubricated Propulsion Shaft Bearings, Renew WORK ITEM 16: Aft Water-Lubricated Propulsion Shaft Bearings, Renew
The beginning of the document. Download the full file to read on.