Sources Sought PD UH60 Test Program Set
Updated
A PDF document (98 KB) attached to UH-60L/M Operational Test Program Sets, from the Department of the Army. Due Nov 10, 2026, 3:30 PM (UTC-8).
File name: Sources Sought_PD_UH60 Test Program Set.pdf
The full file is for paid members, or buy this bid alone.
Preview
Product Description
This is a Sources Sought to identify possible sources to support a possible requirement on a future Acquisition Purchase for the California Army National Guard Medical Readiness Detachment. The items being sought for this upcoming requirement are in reference to Battery Back-up Units. This is NOT a solicitation and ONLY A REQUEST FOR INFORMATION. The Point of Contact for this action is Mr. Manuel Jimenez and can be contacted via email at [email protected] or telephone number 562-795-2551. Please provide response if the following requirements can be supported by email no later than 10 November 2026.
UH-60L/M Operational Test Program Sets
Purpose: To procure Military UH-60L/M Black Hawk specific test program sets to test various aircraft electrical components and systems.
Background: These Test Program Sets (TPS) for the UH-60L/M electrical systems are a critical operational necessity. They ensure flight safety, maximize aircraft readiness (MC rates), and prevent catastrophic failures.
Place of Delivery: 5168 E Dakota Ave, Fresno, CA 93727. Product Requirements:
Line 1: P/N: 991-000-00139-02 Test Program Set (TPS)
The primary requirement for this TPS is to accurately and reliably test the electrical integrity of the Right-Hand (R/H) Relay Panel (Part Number: 70550-02102-056). •
The TPS must be able to automatically verify circuit continuity, detect short circuits or open circuits, confirm proper relay actuation, and ensure there is no signal bleed between circuits.
Must Include the following:
Test Program Software on CD-ROM
Test Adapter Cables (TAC) in storage bags inside a rugged case Line 2: P/N: 991-OTP-00014-02 Operational Test Program Set (OTPS) The requirement is to validate the integrity of high-power AC electrical paths within the Blade De-Ice (BDI) Distributor (P/N 70550-02127-104)
•
The TPS must be able to test for continuity, shorts, and proper load balancing capabilities of the distributor's circuits to ensure it can handle the significant power draw of the de-ice system.
Must Include the following:
Test Program Software on CD-ROM
Test Program Set (TPS) to test BDI Distributor 70550-02127-104 Test Adapter Cables (TAC) in storage bags inside a rugged case Line 3: P/N: 991-OTP-00119-01 Operational Test Program Set The requirement is to verify that the control panels correctly send command signals to the BDI system (P/N 70902-01099-045 & 70902-01099-047). •
The TPS must be able to simulate pilot inputs and confirm that the correct
The beginning of the document. Download the full file to read on.