SoW bldg 205 Security
Updated
A PDF document (202 KB) attached to FY27 - Notice of Intent to Sole Source - Advantor Alarm System, from the Department of the Air Force. Due Nov 6, 2026, 9:00 AM (UTC-7).
File name: SoW bldg 205 Security (1).pdf
The full file is for paid members, or buy this bid alone.
Preview
Statement of Work
BLDG 205. SECURITY SYSTEM
HOLLOMAN AFB, NEW MEXICO
31 July 2026
DESCRIPTION OF SERVICES: The contractor shall provide drawings and a quote for physical security in building 205 that is compatible with existing security systems maintained by Holloman AFB and the 49th SFS and meets the following needs.
1. IDS
1.1 IDS will be installed for all areas that reasonably afford access to the security container or areas where classified data is stored
1.1.1. IDS will include Intrusion detection equipment, will link with Security Forces, and come with operating instructions.
1.1.2. IDS will include a premise control unit with the ability to link to a monitor stations via communication scheme. When the transmission line leaves the facility and traverses an uncontrolled area, Class I or Class II line supervision shall be used.
1.1.3. All IDE equipment must be Underwriter Laboratories (UL)-listed or equivalent and approved by the DoD Component.
1.1.4. All equipment and cabling shall be compliant with requirements set forth in DoDM5200.01V3_AFMAN16-140V3.
2. VIDEO SURVEILLANCE AND RECORDING SERVICES
2.1 Contractor will provide a drawing with proposed camera and monitoring/recording equipment, locations.
2.2. Features
2.2.1. Contractor furnished cameras (NDAA Compliant) and monitoring system must be NEW.
(a) Cameras must cover all entrances and exits to the secured areas of the facility as well as the outer perimeter of the building.
3. ACCESS CONTROLS
3.1. Contractor shall provide all required access controls to include the following: 3.1.1. Automated Entry Control System for all secured area doors. 3.1.2. ID badging system using embedded sensors, integrated circuits, magnetic strips, or other means of encoding data that identifies the facility and the individual to who the card is issued.
3.1.3. ID badge readers with pin pads at all access points to the secured portions of the facility.
3.1.4. All keypads and card readers shall be tamper resistant and securely fastened to the wall in such a manner an unauthorized person in the immediate vicinity cannot observe the selection of input numbers.
4. GENERAL INFORMATION
4.1 All devices will meet minimum standards as prescribed by DoDM5200.01V3 and installation will be ICD705 compliant.
4.2 Any questions should be brought to the 49OG A4 Director 4.2.1. Captain Jared Staples: Office Number: 575-572-0424
The beginning of the document. Download the full file to read on.