Special Packaging Instructions

-TL
Form Approved

OMB No. 0704-0188

SPECIAL PACKAGING INSTRUCTION

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO.

2. CAGE

29537303 (73342) HOUSING, FRICTION CLUTCH

4. NATIONAL STOCK NO.

8. ICQ

AK15086840

5. DATE

9. UNIT PACK WT.

NONE

12. MILITARY PRESERVATION

MIL-STD-2073-1E, METHOD 42

13. CLEANING

MIL-STD-2073-1E

14. DRYING

MIL-STD-2073-1E

15. PACKING

a. LEVEL A

MIL-STD-2073-1E AND NOTE L

b. LEVEL B

MIL-STD-2073-1E AND NOTE L

16. MARKING

MIL-STD-129 AND NOTE M

6. REVISION

9-17-2015

2520-01-508-6840

7. QUP

3. SPI NO.

19207

11. UNIT PACK SIZE (INCHES)

0.506

10.8 X 10.8 X 7.5

10.5
18.

STEPS

-

10. UNIT PACK CU

19.

REQD

20.

DESCRIPTION

1-B A/R PRESERVATIVE: MIL-PRF-16173, GR 4

2-C

1 WRAP #1: MIL-PRF-121, TYPE I, SIZE: 14” X 14”

3-D

1 WRAP #2: MIL-PRF-121, TYPE I, SIZE: 24” X 17”

4-E

1 A-A-59135, SIZE: SEE PAGE 2

5-E A/R A-A-59136, CL 1, GR A, SIZE : SEE PAGE 2

6-E/J A/R ASTM-D4727, DOMESTIC 275, TY CF

7-F
1 INNER CONTAINER: ASTM-D5118, TY CF, SW, ST RSC,
DOMESTIC 275 LB, SIZE: 9 ¾” X 9 ¾” X 6 ½” I.D.
8-G/K 1 BAG: MIL-DTL-117, TYPE I, CLASS E, STYLE 1,

SHEET SIZE: 37” X 20”

9-L
1 UNIT CONTAINER: ASTM-D5118, TY CF, GR W5c, WR,
ST RSC, SIZE: 10 ¼” X 10 ¼” X 7” I.D.

17. NOTES/DRAWING

A. INSPECT PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1E AND THE APPLICABLE CONTAINER SPECIFICATION.
B. APPLY PRESERVATIVE TO ALL UNPAINTED/UNPLATED EXTERIOR SURFACES. C. PLACE WRAP #1 OVER THE INSIDE CUPPED-PORTION OF 29537303 (73342) HOUSING, FRICTION CLUTCH. CONFORM TO SHAPE OF BASE AND CIRCUMFERANCE.
D. PLACE WRAP #2 OVER ENTIRE 29537303 (73342) HOUSING, FRICTION CLUTCH. CONFORM TO SHAPE, SECURE WITH TAPE: ASTM-D5486, TYPE V.
E. CUSHION SIZES AND FABRICATION ARE DETAILED ON PAGE 2. F. PLACE WRAPPED HOUSING, FRICTION CLUTCH, AND CUSHIONING INTO THE INNER CONTAINER, SEE