Special Packaging Instructions C

Form Approved

OMB No. 0704-0188

SPECIAL PACKAGING INSTRUCTION

-OK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE

2. CAGE

6-372-002257 (12361) LIFT CYLINDER ASSEMBLY

19207

4. NATIONAL STOCK NO.

AK11931740

5. DATE

3040-01-193-1740

7. QUP

3. SPI NO.

8. ICQ

22 SEP 2022

9. UNIT PACK WT (LB.)

NONE

12. MILITARY PRESERVATION

MIL-STD-2073-1, METHOD 20

13. CLEANING

MIL-STD-2073-1

14. DRYING

MIL-STD-2073-1

15. PACKING

6. REVISION

200.0

C

10. UNIT PACK CU (CU. FT.)

11. UNIT PACK SIZE (INCHES)

3.185

18.

STEPS

19.

REQD

1B
2C
3D
4E
6F

A/R
A/R
A/R
A/R
A/R

a. LEVEL A

46.2 X 14.0 X 8.5

20.

DESCRIPTION

PRESERVATIVE: (SEE NOTE “B”)

CAPS/PLUGS: NAS847

PRESERVATIVE: MIL-PRF-16173, GR. 4

BARRIER: MIL-PRF-121, TYPE I

BLOCKING/BRACING: MIL-STD-1186 (SEE PAGE 2)

CONTAINER: ASTM-D6880, CLASS 2, STYLE 4,

CLASS

2, STYLE

TREATMENT

A

SIZE: 43-1/4

X 7 A,
X 9-1/2
IN.

MIL-STD-2073-1 AND NOTE F

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES/ DRAWING

A.

QUALITY ASSURANCE PROVISIONS:

1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. 2. INSPECT THE PACKING IN ACCORDANCE WITH THE APPLICABLE CONTAINER SPECIFICATION.

B.

WITH CYLINDER RODS FULLY RETRACTED, FILL WITH PRESERVATIVE USING A MANUFACTURER'S RECOMMENDED LUBRICANT.

C.

SEAL OPENINGS TO THE INTERIOR WITH CAPS/PLUGS OF THE APPROPRIATE SIZE OR WITH TAPE SAE-AMS-T22085.

D.

APPLY PRESERVATIVE TO BARE FERROUS EXTERIOR SURFACES.

E.

APPLY BETWEEN POIN'l'S OF CON'l'ACT OF ITEM WITH BLOCKING OR CON'l'AINER.

F.

THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997

PREVIOUS EDITIONS ARE OBSOLETE

Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved

OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and