Statement of Work 573-24-110 Expand Cardiology

STATEMENT OF WORK

EXPAND CARDIOLOGY SERVICE

PROJECT: 573-24-110

MALCOM RANDALL VA MEDICAL CENTER GAINESVILLE, FL

1. General Statement of Project

The Contractor shall furnish all labor, supervision, qualified subcontractors, materials, equipment, temporary protections, permits, submittals, testing, commissioning support, and closeout documentation necessary to renovate and expand the existing Cardiology administrative service area on the third floor. The completed work shall provide a coordinated, code-compliant, fully operational renovation including private and shared offices, conference rooms, open office area, break room, staff restrooms, waiting area, support spaces, and associated MEP, fire protection, electrical, and technology systems. This two-page scope summary is for bid planning and scope communication only. The full drawings, specifications, contract clauses, amendments, and approved modifications govern. The Contractor shall field verify existing conditions before bidding, coordinate site visits through the COR, and include all incidental work required for complete and functional systems.

2. Major Scope of Work

2.1 General Conditions and Project Controls Mobilization, superintendent, third-party scheduling, cost-loaded schedule, submittal register, coordination meetings, quality control plan, daily reports, as-builts, and closeout. 2.2 Safety, Security, and Infection Control Site-specific Accident Prevention Plan, Activity Hazard Analyses, competent persons, ICRA/PCRA controls, dust control, temporary barriers, PPE, VA badging/security procedures, TB screening, hot-work permits, fire watch when required, and work-area access control. 2.3 Selective Demolition and Hazardous Materials Remove designated partitions, doors/frames, ceilings, flooring, casework, lockers, plumbing fixtures, wall protection, fire extinguisher cabinets, MEP components, and abandoned materials. Perform asbestos/lead-related work only by qualified personnel and in accordance with the project specifications and regulatory requirements. 2.4 Architectural and Interiors Construct new and infill partitions, smoke/fire stopping, gypsum board, acoustical ceilings, soffits, doors, hardware, aluminum storefront systems, expansion joint covers, LVT/resinous flooring, rubber base, paint, wall protection, corner/end guards, casework, solid-surface counters/wall panels, signage, toilet accessories, and finish restoration to match adjacent existing areas. 2.5 Structural and Exterior Work Provide cold-formed metal framing, exterior infill and wall panel work, mechanical duct opening/support framing, non-penetrating duct supports, post-installed anchors, GPR scanning before new slab penetrations, structural coordination, delegated design items, and sealed calculations/shop drawings where required.