Statement of Work - Chemical Milling Service PN

STATEMENT OF WORK

Chemical Milling of Aluminum Sheet Metal

1. SCOPE

1.1. This request identifies supplies and services required to establish a contract for the Chemical-Milling of aluminum sheet metal. The requested Period-of-Performance (POP) from time-of-award to completion is identified in 3.2 Service Identification chart and begins after receipt of an awarded Government Purchase Order (GPO), Government Furnished Material (GFM) and Government Furnished Tools (GFT) or as stated in the PO.
1.2. The acquisition is specific to services for the Chemical Milling of four (4) formed aluminum sheets.

2. APPLICABLE DOCUMENTS

2.1. Northrop Grumman drawing for part number 123CS11022-21 rev. G – Chemical milling details –

DISTRIBUTION STATEMENT D

2.2. Northrop Grumman process specification GSS26100 - Chemical milling aluminum –

DISTRIBUTION STATEMENT D

2.3. SAE-AMS-4036 (2024-T3 COS. 0.071” THICK), Material Specification.

3. SUPPLIES AND SERVICES

3.1. The Contractor is required to chemically-mill the government provided aluminum sheets as identified on the Northrop Grumman 123CS11022-21 rev. G. Masking templates will be provided by the government to help identify the areas to be chemically milled. The Government requires that a Certificate of Conformance (COC) be furnished by the contractor upon completion and return shipment of the material.

3.2. Service Identification:

PART

NUMBER:

Nomenclature:

123CS1102221

SKIN

O/S
Work
Order:
57848290

Parent
Work
Order:
57847943

NWH.NWA:

QTY:

NOTES:

100002505856.0010

EXPEDITE

TURN

AROUND 7

DAYS

4. REQUIREMENTS

4.1. Services Required:

4.1.1.

The Contractor shall provide services to chemically-mill aluminum sheets in accordance with the Northrop Grumman Process Specifications in drawing referenced in Section 2.1 for part number 123CS11022-21 rev. G.

4.1.2.

The quantity is four (4), part number 123CS11022-21 Rev G.

4.1.3.

The Contractor shall prepare and submit a COC confirming the service provided is in accordance with all requirements and specifications.

4.1.4.

Upon completion of the service, the Contractor is required to package the milled sheets, the template and the COC using current commercial practice for return ground transportation (e.g. FedEx, UPS or similar service) to the government at the specified delivery location. Return shipping shall be Free on Board (FOB) DESTINATION. Shipment documents are required to include the contract number, requisition number and the FRCSW point of contact.

4.2. Government Furnished Material (GFM)

4.2.1.

Four (4) formed aluminum sheets. SH 2024-T3 COS 0.071” THICK PER AMS-4036.