Home / Luff Hoist RRL & LRL Wire ropes / Document

Statement of Work Hoist Wire Rope

Updated

A PDF document (162 KB) attached to Luff Hoist RRL & LRL Wire ropes, from the Defense Logistics Agency. Due Nov 30, 2026, 1:00 PM (UTC-5).

File name: SOW Hoist Wire Rope.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

LUFF HOIST (PORT) WIRE ROPE SPECIFICATIONS

1.

SCOPE OF WORK:

Provide replacement luff hoist (port) wire rope for Portal Crane. 2.

SPECIFICATIONS:

2.1 WIRE ROPE SHALL:

Be ASTM A1023/A1023M-21 compliant 6 × 36 classification wire rope. Not be rotation resistant.
Be extra improved plow steel (EIPS/XIPS/Grade 1960) or extra-extra improved plow steel (EEIPS/XXIPS/Grade 2160) wire rope.
Be pre-formed wire rope.
Have bright (uncoated), non-galvanized surface finish.
Be of right regular lay (RRL) lay type and lay direction. Have an independent wire rope core (IWRC), wire strand core, or steel core. Permanently lubed and plastic filled ropes are permissible. Be 1-3/4” (-0%/+5%) nominal diameter (ASTM A1023/A1023M-21). Be at least 530 ft. (-0%/+1%) (within 1’ of starboard luff wire rope length) in length. Have a minimum breaking strength of at least 263,644 lbs. Have a minimum bend radius ratio D/d less than or equal to 24. Be in one continuous spool, all taken from the same reel; the use of splices to permanently connect different reels of wire rope is prohibited.
The spool the wire rope to be shipped with will be of metal construction only To facilitate the inspection of the wire rope, be shipped with an additional empty metal spool equivalent in size to the spool containing the wire rope. Have two distinct types of end connections, one at each end of the wire rope. o The first end connection shall be an open spelter socket, Crosby S-416, P/N: 1039842, unpainted.
On location or prior to putting on reel, it shall be either poured (i.e. molten zinc) or with resin, into a steel socket.
Poured spelter socket end connections shall be fabricated in accordance with Naval Ships’ Technical Manual (NSTM) S9086-UU-STM-010 Chapter 613 Rev. 5, sections 1.11.2 through 1.11.2.3(m).
Resin socketing material must meet NSTM S9086-UU-STM-010 Chapter 613 Rev. 5, sections 1.11.3 through 1.11.3(h)(4), and resin end connections shall be fabricated in accordance with the resin OEM’s instructions. o The other end connection shall be a welded Link Becket per the latest edition of the Wire Rope User’s Manual fifth edition.
3.

INSPECTION:

The two areas that require inspection are the wire rope and the end connections. The inspection criteria for these two areas are included below:

3.1 WIRE ROPE:

The wire rope shall be inspected by government personnel (specifically Code 700 Personnel located at Portsmouth Naval Shipyard) prior to acceptance by the government. This inspection shall be

The beginning of the document. Download the full file to read on.

Other documents in this bid