Statement of Work PotPanRoom
Updated
A Word document (23 KB) attached to JR/BP Pots and Pans Room | Washington DC VAMC, from the Department of Veterans Affairs. Due Nov 4, 2026, 10:00 AM (UTC-5).
File name: SOW_PotPanRoom-FINAL.docx
The full file is for paid members, or buy this bid alone.
Preview
B.3 STATEMENT OF WORK
NFS Kitchen Pot & Pan Room Equipment Procurement and Installation Washington DC VA Medical Center (DCVAMC) — Station 688
50 Irving Street NW, Washington, DC 20422
1. SCOPE OF WORK
1.1 EQUIPMENT TO BE FURNISHED
The Contractor shall furnish the following commercial kitchen equipment items, manufactured to the specifications stated below. All equipment shall be new, unused, and of current production. Rebuilt, refurbished, or remanufactured equipment is not acceptable. Item 1: Custom 2-Compartment Sink System with Drainboard Specification
Requirement
Manufacturer / Model
Aerowerks Model No. 2 Compartment Sink (or equal meeting all salient characteristics) Configuration
2-compartment sink with drain board, disposer control panel bracket, and backsplash Pre-Rinse Faucets
(1) T&S Brass Model B-0131 pre-rinse faucet; (2) T&S Brass Model 5F-8WLX14 pre-rinse faucets Clean Dish Table
(1) Aerowerks Model CDT clean dish table
Construction
Stainless steel, commercial grade, NSF listed
Disposer Cone
18” cone assembly — disposer cone to be shipped to sink manufacturer for factory welding Assembly
Factory technician field assembly required (see Section 3.3) Item 1.2: Food Waste Disposer
Specification
Requirement
Manufacturer / Model
Salvajor Model 200-CA-18-ARSS (or equal meeting all salient characteristics) Type
Food waste disposer, 18” cone assembly
Motor
2 HP
Controls
Start/stop push button, drain/flush/time delay, automatic reversing and water saving ARSS control Features
Fixed nozzle, chrome plated vacuum breaker, solenoid valve, scrap ring and flow control Inlet Diameter
6-1/2”
Housing
Heat treated aluminum alloy, corrosion resistant
Electrical
208V / 60Hz / 1-Phase, 12.1 amps full load
Certifications
UL, CE
Item 2: Pot Scrubber / TurboWash System
Specification
Requirement
Manufacturer / Model
Hobart Model TWII+BUILDUP (or equal meeting all salient characteristics) Type
TurboWash II pot scrubber with buildup configuration
Wash Nozzles
(8) 1-1/2” angled stainless steel wash nozzles
Pump Motor
Heavy duty 2-HP, on/off pump switch, thermal overload and low water cut-off Construction
14 gauge 304 stainless steel
Electrical
208-240V / 60Hz / 3-Phase
Direction
Left-to-right operation
Heater
2.5 kW electric heater with two heat settings
Wash Sink
36” wash sink with strainer sump
Timer
Automatic shutdown timer, 1-8 hours (preset at 4 hours)
The beginning of the document. Download the full file to read on.