Tab 04 4 Statement of Work
Updated
A PDF document (161 KB) attached to 30 lbs of M55J Carbon Prepreg 12" wide fiber tape embedded with F6 cyanate ester resin; 30 lbs of K13C2U Carbon Prepreg 12" wide fiber tape embedded with F6 cyanate ester resin, from the National Aeronautics and Space Administration. Due Nov 18, 2026, 7:00 AM (UTC-6).
File name: SATPC0043119 Tab 04 4 SOW.pdf
The full file is for paid members, or buy this bid alone.
Preview
STATEMENT OF WORK
1. Objective/Requirements
The NASA Next-gen Ultra-stable Structures (NGUS) project is seeking carbon fiber prepreg tapes with specific characteristics to construct structural composites.
2. Characteristics, Scope, and Specs
The vendor shall provide the following materials:
• M55J Carbon Prepreg
o Fiber Type: M55J
o Fiber area weight (FAW): 73 gsm ± 2 gsm
o Resin content (RC): 35 wt.% ± 2 wt.%
o Mass Quantity: 30 lbs
• K13C2U Carbon Prepreg
o Fiber Type: K13C2U
o Fiber area weight (FAW): 80 gsm ± 2 gsm
o Resin content (RC): 31 wt.% ± 2 wt.%
o Mass Quantity: 30 lbs
General Specifications for Both Materials:
• Resin Type: PMT-F6 Cyanate Ester
• Format: Unidirectional
• Width: 12-inch-wide tape or greater
• Cured ply thickness: Roughly 0.0025 inches (For reference only, not a requirement)
• The prepreg shall be shipped with dry ice
• The prepreg shipment shall include a temperature recorder • Manufacturer shall deliver all relevant documentation to NASA Langley Research Center that includes information such as processing requirements, material properties, safety (safety data sheet)
There is no need to specify fiber and resin certifications to a specific standard.
3. Place of Performance
All materials shall be shipped to and stored at NASA Langley Research Center in Hampton, VA.
4. Period of Performance
Materials are needed at NASA Langley Research Center no later than December 4, 2026.
The beginning of the document. Download the full file to read on.