TAB 04 4 Statement of Work

Statement of Work
Ximea Hyperspectral Cameras

A. Background/History of Requirement:

NASA requires hyperspectral imaging capability, specifically the collection and analysis of spectral signature data across the visible and near-infrared bands. Conventional RGB imaging cannot resolve the spectral information needed for [material classification / target characterization / vegetation or surface analysis — specify]. Snapshot mosaic sensors are required rather than push broom or filter-wheel designs because the application involves [moving platforms / dynamic scenes / single-exposure capture], which precludes scanningbased acquisition. Two complementary units are required to provide continuous coverage across the visible and near-infrared ranges.
B. Description of item(s) to be purchased:
XIMEA hyperspectral cameras and accessories, as follows: •

•

•
•

Qty 1 — MQ022HG-IM-SM4X4-7VIS3, xiSpec hyperspectral USB3 micro-B camera, 4×4 snapshot mosaic, 460–600 nm (VIS), IMEC sensor based on CMOSIS CMV2000, global shutter CMOS; includes USB stick and four M2 screws
Qty 1 — MQ022HG-IM-SM5X5-7NIR2, xiSpec hyperspectral USB3 micro-B camera, 5×5 snapshot mosaic, 665–960 nm (NIR Generation 2), IMEC sensor based on CMOSIS CMV2000, global shutter CMOS; includes USB stick and four M2 screws
Qty 2 — CBL-U3-3M0, USB 3.0 cable, 3.0 m, thumbscrew locking connector Qty 2 — XISPEC2-KIT-7-35-TILE-TRI, xiSpec2 starter/demo kit (xiQ-S7) — includes 35 mm VIS/NIR lens, Lite diffuse reflectance target, mini tripod, PH00 screwdriver, USB3 Type-C OTG adapter, tripod bracket, 3.0 m USB 3.0 cable, 5 m trigger I/O cable, and PELI transport case

C. Requirements Specifications:

Items shall meet or exceed the following:
•
•
•
•
•
•
•

Sensor technology: IMEC snapshot mosaic hyperspectral sensors, single-exposure spectral capture (no scanning or filter wheel), based on the CMOSIS CMV2000 imager Spectral coverage: One camera covering 460–600 nm via a 4×4 mosaic (16 bands); one camera covering 665–960 nm via a 5×5 mosaic (25 bands)
Shutter: Global shutter on both cameras, required for imaging of moving targets or from a moving platform without spatial distortion
Interface: USB 3.0, micro-B connector; locking-thumbscrew cables required to prevent disconnection under vibration or cable strain
Optics: 35 mm focal length lens compatible with both VIS and NIR bands Calibration support: Diffuse reflectance target required for white referencing and radiometric normalization