Tab 04 4 Statement of Work Updated 2

STATEMENT OF WORK

1. Objective/Requirements

Purchase of an AB CompactLogix rack.

2. Characteristics, Scope, and Specs

The PLC shall have the following:
• AB CompactLogix 5069-L330ER or better preferred, safety PLC not required • Power solution shall be finger safe, 120VAC or 24VDC
• Operate in a wall panel, in a climate-controlled, non-hazardous lab • Only PLC and development software to be provided, licensing must be perpetual o No engineering or development work needed. Only the purchase • Screw terminals for all cards, if applicable
• Inputs:
o 32 Thermocouples, R, S, K, C such as AB 5069-IY4 with o 24 Analog Inputs such as AB 5069-IF8
o 16 Discrete Inputs such as 5069-IB16F
• Outputs
o 32 simple Discrete Output such as 5069-OB16
o 32 relay outputs such as 5069-OW16
o 4 isolated relay outputs such as 5069-OW4I, ideally rated for 0.5-1+Amp o 4 Analog Outputs such as 5069-OF8
• Communication
o 6 Serial ports RS-232, Modbus RS-485 such as 5069-SERIAL o Ethernet, dual preferred.
o AENTR Remote IO Adapter Rack for remote card control
• AB 15” PanelView Plus 7 with mounting hardware
• FactoryTalk Studio ME for the PanelView. We have the PLC software already. • Allen-Bradly technical 8x5 remote phone support for 1 year. • Optional: PC Historian/Data Recording software solution for above IO. Previous standard is to record at will at 10 Hz for only a few hours at once. 10 Hz not a requirement.

3. Place of Performance

MSFC Building 4205 Lab 104

4. Period of Performance

Purchase only