Tab 04 Statement of Work

STATEMENT OF WORK TEMPLATE

1.0 Introduction/Background: Two stands are inoperable in the structures and materials laboratories (buildings 1205) within the Durability Damage Tolerance and Reliability Branch (DDTRB). Actuators and manifolds need repairs for these MTS controlled hydraulic test stands for upcoming work. Currently these test stands are inoperable and need parts replaced and rebuilt. This work is needed to get these test stands operational. 2.0 Scope of Work: Rebuild two provided actuators and two manifolds as specified. CLIN 1: Cylinder Assembly Remanufacture for Model 204.81; 150 mm (6 in) Stroke Model 204.81, Assembly # 094081-05, S/N 299:





Piston rods are to be grond and resurfaced to factory standards End cap bearings are to be resurface or replaced
Clearances are inspected and brought to specifications
Pressure check and verify performance

CLIN 2: For Hydraulic Servis Manifold (HSM) Model 294.12, S/N 1297 rebuild with the following components:












038-806-501 _ Seal Kit _ Qty 1
036-414-003 _ Accumulator _ Qty 2
038-803-001 _ 294.12 Filter Kit / Level 1 _ Qty 1
036-414-001 _ Accumulator _ Qty 1
011-174-156 _ Reducing Valve _ Qty 1
006-733-830 _ Directional Control Valve _ Qty 2
006-847-954 _ Check Valve _ Qty 1
011-174-104 _ Check Valve _ Qty 1
009-967-001 _ Piston Poppet _ Qty 1
056-006-401 _ 10 GPM Servo Valve Qty 1 *(Servo Valve currently on manifold needs to be returned to customer)
Misc. Fittings

CLIN 3: For Hydraulic Servis Manifold (HSM) Model 294.12, S/N 1349 rebuild with the following components:




038-806-501 _ Seal Kit _ Qty 1
036-414-003 _ Accumulator _ Qty 2
038-803-001 _ 294.12 Filter Kit / Level 1 _ Qty 1










036-414-001 _ Accumulator _ Qty 1
011-174-156 _ Reducing Valve _ Qty 1
006-733-830 _ Directional Control Valve _ Qty 2
006-847-954 _ Check Valve _ Qty 1
011-174-104 _ Check Valve _ Qty 1
009-967-001 _ Piston Poppet _ Qty 1
056-006-401 _ 15 GPM Servo Valve Qty 2 *(Servo Valve currently on manifold needs to be returned to customer)
Misc. Fittings

CLIN 4: Cylinder Assembly Remanufacture for Model 244.22 • Assembly # 379992-01 • S/N 652:








Piston rods are to be ground and resurfaced to factory standards Piston rod is modified to make "Tempo Ready"
End cap bearings are to be resurfaced or replaced
Seals are replaced with a G1+/G2 seal kit designed specifically for the new