Home / Development and Optimization of Custom Pigmentation of… / Document

Tab 04 Statement of Work

Updated

A PDF document (359 KB) attached to Development and Optimization of Custom Pigmentation of Textiles for Artemis Suit Materials Project Phase IV, from the National Aeronautics and Space Administration. Due Nov 18, 2026, 4:00 PM (UTC-6).

File name: Tab 04 SOW.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

`Statement of Work for Pigmented Coating Pilot
Request for quotation | Artemis Suit Materials project | Revision A | 5 October 2026 The contractor shall quote a pilot application and evaluation of a flexible white pigmented coating on Governmentprovided textiles. The work will produce documented, representative coated material for adhesion and handling assessment and for subsequent Government-led environmental testing. This SOW defines a base effort and separately priced options so quantities and cost can be adjusted after sample layout is agreed.

1 Technical basis and objective

Preliminary trials of a flexible white pigmented coating on seven textiles showed encouraging tape adhesion and manual bend performance after a single spray session with IPA wipe cleaning and no primer. Minor bubbling occurred on one side of a laminated PTFE construction. These observations are preliminary and shall be documented and evaluated on larger specimens under this pilot. The pilot shall determine whether the coating can be applied reproducibly, survive cutting, sewing and representative folding or rolling, maintain adhesion after bakeout, and provide suitable specimens for cryogenic, abrasion, UV, and material qualification assessments. No dust barrier or flight qualification is assumed from this effort.

2 Government furnished materials and sample plan
The Government will provide identified fabric lots with face and back orientation marked, where applicable. The initial seven candidates are listed below; the Government may substitute an equivalent candidate before quote acceptance without increasing the count. The contractor shall propose the usable coated sheet dimensions needed to yield the planned specimens, separate cutting-trial samples and witness samples, with allowance for spray margins and cutting losses. Identify additional usable reserve area and its price in the quotation to support repeat tests, added test opportunities, and future exposure specimens such as MISSE. Candidate

Material or construction

Woven basalt textile, with existing mineral oil finish

Versive BetaCloth

PTFE fabric laminated with fluoropolymer film (identified as FEP in the earlier list; confirm construction)

JPS Kevlar 775

Custom Vectran/Kevlar weave; limited supply

Teflon T162 plain weave

Vectran Turtleskin Style 1410

The Government will also provide clean PTFE film sheets or strips for optional coating or coating-on-substrate outgassing specimens. The exact material IDs, lot sizes, coating face orientation, and graphic candidates shall be

The beginning of the document. Download the full file to read on.

Other documents in this bid