Tab 04 Statement of Work

Statement of Work
Oscilloscope

A. Background/History of Requirement:

NASA performs embedded hardware bring-up, board-level debug, and power and signal integrity analysis. This work requires simultaneous observation of analog signals, digital bus traffic, and current draw during transient events — capability not available with existing test equipment. Present instrumentation is limited to [describe current scope/bandwidth or state that no oscilloscope is currently assigned], which is insufficient to resolve high-speed serial and clock signals or to correlate digital protocol activity with analog behavior. A mixed-signal oscilloscope with adequate bandwidth, deep record length, and a matched probe complement is required to diagnose intermittent faults, validate power rails, and verify timing margins. B. Description of item(s) to be purchased:
Tektronix oscilloscope and accessories, as follows:












Qty 1 — MSO44B, 4 Series Mixed Signal Oscilloscope, four (4) FlexChannels, 31.25M record length, 1year warranty, Certificate of Traceable Calibration Qty 1 — MSO44B 4-BW-1000, installed option, 1 GHz bandwidth Qty 1 — 4-ULTIMATE-PER, Ultimate software bundle for 4 Series MSO, perpetual license, node locked Qty 1 — HC4, hard transit case with front cover
Qty 1 — MSO44B A0, North America power cord
Qty 1 — MSO44B D5, calibration data report, 5 years (requires Option C5) Qty 1 — TLP058, 8-channel general purpose logic probe with accessory kit Qty 1 — TICP100, 1 GHz isolated current probe
Qty 1 — TCP0030A, AC/DC current probe, 30 A DC, DC to 120 MHz, TekVPI, with Certificate of Traceable Calibration
Qty 1 — TDP1000, differential probe, 1 GHz, 5X/50X, ±42 V, TekVPI Qty 1 — TAP1500, active single-ended probe, 1.5 GHz, 10X, TekVPI

C. Requirements Specifications:

The instrument and accessories shall meet or exceed the following: 





Channels: Four (4) analog input channels, each configurable as analog or digital (FlexChannel or equivalent)
Bandwidth: 1 GHz on all analog channels, factory installed Record length: Minimum 31.25 M points per channel
Digital acquisition: Support for a minimum 8-channel logic probe with accessory kit Analysis software: Full application bundle including advanced jitter/eye, power, and serial protocol analysis; perpetual, node-locked license







Probing: Isolated current measurement to 1 GHz; AC/DC current measurement to 30 A DC and 120 MHz; differential voltage to 1 GHz at ±42 V; single-ended active voltage to 1.5 GHz. All voltage/current