Home / Silicone Free Annealing Oven / Document

TAB 07 Statement of Work PRINTED

Updated

A PDF document (93 KB) attached to Silicone Free Annealing Oven, from the National Aeronautics and Space Administration. Due Nov 19, 2026, 3:00 PM (UTC-6).

File name: SATPC0043186 TAB 07 SOW PRINTED.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

Statement of Work (SOW)
Project: Silicone Free Annealing Oven

GENERAL INFORMATION

1.0

Scope of Work: This document describes the silicon free annealing oven for installation in the cleanroom at NASA GSFC. The function of the oven is described, including vacuum performance, size, construction (i.e., silicone free), cleanroom compatibility, temperature range, calibratability, and other performance characteristics. The document further describes the expectations for schedule of completion of the work, support for packaging and shipping, support for installation of the item and any needed training or customer support to get the tool operational, and warranty of its performance for a one year time period.

2.0

Background: NASA GSFC has a need to anneal ultraclean samples at temperatures up to 260 C. These samples are thin metal films on silicon substrates (or similar metal and dielectric materials) and, post annealing, go on to become device wafers for engineering prototypes and flight instruments and have requirements for molecular and particulate contamination. The samples are relatively small (4” and 6” discs coated with thin films) so the oven needs to be sized appropriately for a holder suitable for a small batch (up to 10) of such samples. The filtration and flow control on the dry nitrogen purge are also critical as the samples tend to absorb humidity and the goal of the annealing is reproducibility of the temperature cycle without inducing unwanted aging in the samples. The oven will be housed in a cleanroom environment and is expected to be fully cleanroom compatible and silicone-free for all gaskets and interior and exterior parts, in order to reduce the possibility of molecular contamination with difficult to remove contaminants like silicone.

3.0

Objective: NASA GSFC will obtain a vacuum oven suitable for installation in a cleanroom meeting specifications for interior cleanliness, nitrogen purge flow and filtration, oven interior and exterior size (footprint and height), silicone-free construction.

CONTRACTOR REQUIREMENTS

4.0

Technical Requirements or Description of the Work:

The oven shall be all new construction. No used or refurbished systems will be accepted. The exterior of the oven shall be silicone free and suitable for a cleanroom environment

The interior of the oven shall be clean polished surfaces that can be cleaned of particles and do not shed particles
The oven shall be supplied with a nitrogen purge.
The oven nitrogen purge shall be filtered with a replaceable filter and have control over the

The beginning of the document. Download the full file to read on.