Updated SHB pulsed HPA Statement of Work MARKUP Rev.1

Advanced Light Source
Sub-Harmonic Buncher
Pulsed RF High Power Amplifier
Statement Of Work

Document Number : AL-1887-8783

Revision: A

Document Status:
Document Type: NOTE
Category Code:
LINAC Sub Harmonic Buncher Amplifier Systems

4.1

4.2

4.3

5.1

5.2

5.3

5.4

5.5

5.6

5.7

5.8

5.9

5.10

5.11

5.12

5.13

5.14

5.15

5.16

6.1

7.1

7.2

7.3

7.4

7.5

7.6

7.7

8.1

1 REVISION HISTORY

Rev.
A

CM Number
AL-1887-8783

Description of Change
Original document release

2 APPROVALS

The following individual(s) shall approve this document: Approver Name
Benjamin Flugstad
David Nett

Project Role

Electrical Engineering Hardware Group Lead: Engineering and ALS Divisions
RF System Technical Lead EE

3 ABBREVIATIONS AND ACRONYMS

AC
ALS

ALS-U

AR
ARO

COTS

EPICS

ESD
FAT
FDR
FET

FPGA

FSM
HMI
HPA
ID

LBNL

LCW

LDMOS

Alternating Current
Advanced Light Source
Advanced Light Source Upgrade
Accumulator Ring
After Receipt of Order
Commercial Off The Shelf
Experimental Physics Industrial Control System
Engineering Specification Document
Factory Acceptance Test
Final Design Review
Field Effect Transistor
Field-Programmable Gate Array
Finite State Machine
Human Machine Interface
High Power Amplifier
Identification
Lawrence Berkeley National Laboratory
Low Conductivity Water
Laterally Diffused Metal Oxide Semiconductor

LLRF

LOTO

NRTL

NUM

POIN

PLC
PS
RF
SAT
SOW
USD
VAC

VHDL

Low-Level RF
Lock Out Tag Out
Nationally Recognized Test Laboratory
Number
P-type/Intrinsic/N-type semiconductor (diode)
Programmable Logic Controller
Power Supply
Radio Frequency
Site Acceptance Test
Statement of Work
United States Dollars
Voltage Alternating Current
(VHSIC-HDL) Very High Speed Integrated Circuit Hardware Description Language

4 INTRODUCTION

This Statement of Work (SOW) document provides the scope of work to be done by the

prospective vendor in the procurement contract, to be awarded, for two pulsed RF HPA units of pulsed flat top output power of 25 kW, one unit (HPA-1) operating at approximately 125 MHz and second HPA unit (HPA-2) operating at approximately 500 MHz. The two HPA units shall be based on latest solid state RF LDMOS or GaN FET technology and they will replace

the existing old tube based RF pulsed HPA for providing requisite stable and controlled pulsed high power to the two Sub-Harmonic Buncher cavities in the Linac section of

Advanced Light Source at LBNL. This document outlines the vendor responsibilities and