155mm Modular Artillery for Combat Effectiveness (MACE)
Updated
Solicitation from the Department of the Army. Due Nov 30, 2026, 3:00 PM (UTC-5), 12 days left.
| Solicitation number | W15QKN26R1C5R |
|---|---|
| Agency | Department of the Army |
| Office | W6QK Acc-Ri-Picatinny |
| Notice type | Solicitation |
| Set-aside | None |
| Trade (NAICS) | Ammunition (except Small Arms) Manufacturing (332993) |
| Product or service code | 1320 |
| Posted | Nov 17, 2026 |
| Response deadline | Nov 30, 2026, 3:00 PM (UTC-5) (12 days left) |
| Add the deadline to | Google Calendar · Apple / Outlook (.ics) |
Bid documents (14)
- Attachment 9: Packaging and Unitization - MUST BE SUBMITTED FOR TDP controlled: request access on SAM.gov
- Attachment 8: Purchase Description - MUST BE SUBMITTED FOR TDP ACCESS controlled: request access on SAM.gov
- Attachment 17 - 3D Model Creation and Standardization Guidance Document controlled: request access on SAM.gov
- Attachment 18: Contract Quality Requirements for MACE controlled: request access on SAM.gov
- Attachment 19: M1128 Base Bleed Package controlled: request access on SAM.gov
- Attachment 20: MACE BB Motor Assembly Components controlled: request access on SAM.gov
- Attachment 21: rf smoke payload controlled: request access on SAM.gov
- Attachment 22: Specifications M1128 Base Burner 5 controlled: request access on SAM.gov
- Attachment 26: Updated MACE Offeror Questions Addressed (Dated10-15) 25 KB
- PPON MACE Extended Updated Attachments- (Dated 10-15) 75 KB
- Attachment 34 - - Rotating Band Cover controlled: request access on SAM.gov
- Attachment 33: Updated MACE Offeror Questions Addressed Dated11 5 controlled: request access on SAM.gov
- Attachment 35: Updated MACE Offeror Questions Addressed Dated11 12 controlled: request access on SAM.gov
- Attachment 36: Updated MACE Offeror Questions Addressed Dated11 16xlsx controlled: request access on SAM.gov
Paid members download every document from this page, or buy this bid alone.
Description
Amendment 0011 - The purpose of this Amendment 0011 is to incorporate the updated questions and answers attachment, formally update the Terms and Conditions acceptance timeline, and establish a final question cutoff deadline in the Prototype Project Opportunity Notice (PPON). Specifically, this amendment: Formally Incorporates Updated Attachments: The following updated attachments are incorporated into the solicitation and replace all previous versions: Attachment 36 Updated MACE Offeror Questions Addressed (Dated 11-16), incorporating Questions #34 through #38.
Please note: Attachment 36 has been uploaded as a Controlled attachment. Attachment 37 Terms and Conditions (Dated 11-16), updated in Supplement 1 (Invoicing and Payment Instructions), Section F, to formally codify the thirty (30) calendar day review and acceptance timeline per Question #36. PPON Document MACE Extended (W15QKN-26-R-1C5R, Dated 11-16), revised to update the Section 11 attachment list and add Section 3.1.14 establishing the final deadline for industry questions.
Establishes Final Question Cutoff Date: Section 3.1.14 is added to the PPON as follows: 3.1.14 Question Cutoff Date: To ensure the Government has sufficient time to review, coordinate, and formally respond to all industry inquiries prior to the upcoming holiday and proposal closing date, the Government will no longer accept questions or requests for clarification after 1500 EST on November 18, 2026.
Any questions received after this date and time will not be addressed. Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended attachments (dated November 16, 2026) as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes.End of Amendment 0011Amendment 0010 - The purpose Amendment 0010 is to incorporate the updated questions and answers attachment and to formally revise the Prototype Project Opportunity Notice (PPON) Volume IV row of the Section 3.2.1 table.
Specifically, this amendment:
- Formally Incorporates Updated Attachments: The following updated attachments are incorporated into the solicitation and replace all previous versions: Attachment 35 Updated MACE Offeror Questions Addressed (Dated 11-12), incorporating Questions #32 and #33. Please note Attachment 35 has been uploaded as a Controlled attachment. PPON Document MACE Extended November 30 W15QKN-26-R-1C5R (Dated 11-12), revised to incorporate the updated attachment list in Section 11 and Volume IV row of Section 3.2.1 table.
- Establishes Proposal Submission Boundaries: This correction ensures that the SOW Section 6.0 Milestone Table remains strictly in Volume III (Cost/Price) as a priced document, while the Section 889 Certification is properly submitted within Volume IV (Miscellaneous Agreement Documentation).Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended attachments (dated November 12, 2026) as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes..End of Narrative 0010Amendment 0009 - The purpose of this Amendment 0009 is to incorporate the updated questions and answers attachment, formally revise the proposal submission portal instructions in the Prototype Project Opportunity Notice (PPON) and to add Attachment 34. Specifically, this amendment: Formally Incorporates Updated Attachments and a new attachment: The following attachments are incorporated into the solicitation and replace all previous versions: Attachment 33 Updated MACE Questions Addressed (Dated 11-5), incorporating Questions #24 through #31 (including key clarifications regarding propellant GFE, NRE milestone formatting, and payload canister compatibility). Please note Attachment 33 has been uploaded as Controlled attachment. Attachment 34 12961016 Rotating Cover Band has been uploaded as Controlled attachment in response to question #28. PPON Document: PPON MACE EXTENDED November 30 W15QKN-26-R-1C5R Dated 11-5) has been revised to incorporate the updated attachment list in Section 11. Amends the PPON Submission instructions: The PPON Document: PPON MACE EXTENDED November 30 W15QKN-26-R-1C5R Dated11-5) has been revised in Section 3.1.13 to formally correct the submission portal from SAM.gov to Procurement Integrated Enterprise Environment (PIEE) Proposal Manager Module: Revised Text: 3.1.13 All proposal submissions shall be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) Proposal Manager Module (piee.eb.mil) .The direct solicitation link may be accessed via the active solicitation notice on SAM.gov. Instruction to Offerors: All Offerors shall use the timelines, relative durations, and CLIN structures specified within these amended attachments (dated November 5, 2026) as the sole, definitive basis for their proposal submissions, including their Technical, Schedule (IMS), and Cost/Price volumes.
The description continues in the official notice.
Contracting contact
- Mary O'CONNELL · [email protected]
- Christopher Brown · [email protected]
As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.
Is your business small enough?
For NAICS 332993, a business counts as small if it has no more than 1,500 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.
Notice history
- Nov 17, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Nov 12, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Nov 12, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Nov 9, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Nov 9, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Oct 30, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Oct 27, 2026: Solicitation Due Nov 30, 2026, 3:00 PM (UTC-5)
- Oct 16, 2026: Solicitation Due Oct 30, 2026, 3:00 PM (UTC-4)
Companies that win this kind of work
Federal contractors paid for ammunition manufacturing work, who also hold Army contracts (last 12 months): possible competitors, or partners to team with.
- The Boeing Company $1.3 billion in this trade
- Raytheon Company $1.0 billion in this trade
- General Dynamics OTS (Wilkes Barre), LLC $389.5 million in this trade
- Amtec Corporation $283.1 million in this trade
- Northrop Grumman Systems Corporation $252.3 million in this trade
About the buyer
The Department of the Army awarded $112.7 billion in contracts in the last 12 months; its biggest suppliers were Lockheed Martin Corporation, The Boeing Company and Raytheon Company. See what Army is buying now.
Ammunition Manufacturing contracts right now
There are 13 open government contract opportunities in this trade (NAICS 332993), 7 posted in the last 7 days; 23% are set aside for small businesses. The agencies buying the most are Department of the Army, Department of the Navy and Department of the Air Force. Most of the work with a stated place is in New Jersey, Arkansas and Maryland. A notice in this trade gives a median of 30 days from posting to deadline; this one gives 13 days.
All open ammunition manufacturing contracts