Home / Navy / Other Metal Valve and Pipe Fitting Manufacturing / Notice

Valve, Sol 3-WAY

Updated Nov 3, 2026

Solicitation from the Department of the Navy. Due Nov 30, 2026, 2:00 PM (UTC-4), 27 days left.

Title as posted	48--VALVE, SOL 3-WAY
Solicitation number	N0010427RBB29
Agency	Department of the Navy
Office	NAVSUP Weapon Systems Support Mech
Notice type	Solicitation
Set-aside	None
Trade (NAICS)	Other Metal Valve and Pipe Fitting Manufacturing (332919)
Product or service code	4810
Posted	Nov 2, 2026
Response deadline	Nov 30, 2026, 2:00 PM (UTC-4) (27 days left)
Add the deadline to	Google Calendar · Apple / Outlook (.ics)

Official noticeSend to a teammate

Description

SCOPE 1.1 In the event of a conflict between section "C" and section "D" of the contract/purchase order, Section "C" will take precedence.
APPLICABLE DOCUMENTS 2.1 Applicable Documents;

Technical documents associated to this solicitation or award such as; IRPOD, drawings,technical data, STRs, as well as certain military specifications, and commercial item descriptions (CID) etc. May be obtained at (HTTPS://logistics.UNNPP.GOV/ECOMMERCE) these documents, at the required revision levels that are associated to either this solicitation or award, become a part of this solicitation or award unless changed by an ADMENDMENT to the solicitation or modification to the award.

This website requires a password and PRE-registration. To obtain instruction on how to register and obtain a password contact the BPMI website administrator. 3.

Requirements 3.1 NAVSUP WSS-MECH code N94 additional technical documentation order of precedence and effective issues of cited documentation dated: July 2004 a. Order of precedence for document conflict resolution: the technical and quality requirements applicable to manufacture of the material being purchased under this order are contained or invoked in one or more of the documents listed below.

In the event of any inconsistencies between any provisions of this order, the order or precedence shall be as follows:

Amendments to the purchase order/contract
Schedule of supplies of the purchase order/contract.
Terms and conditions of the purchase order/contract.
Individual repair part ordering data (IRPOD); or master procurement specification, as applicable.
Any invoked standard technical requirements (STRS).
Drawings referenced in the IRPOD, or master procurement specification , as applicable.
Specifications referenced in the IRPOD, master procurement specifications or drawing(S), as applicable.

B. Effective issues of cited drawings, specifications, standards and other documents:

The contractor shall comply with the specified revisions of the documents (i.e. drawings,specifications,standards and other documents) cited in the IRPOD and/or procurement specification contained herein. The contractor shall obtain written approval for the contracting officer to use document revisions other than those specified. When a later drawing revision is submitted for approval, two full size clear legible prints shall be provided.
Where documents are referred to only by the basic identification name or number and no specific revision thereto, the contractor use of any issue of the document except all such revisions shall be dated 1 November 1969 or later.

C. Use of document revisions in their entirety:

Contractors shall use revisions to each cited or referenced document in its entirety unless the contractor obtains contracting officer approval to do otherwise (i.e. the contractor shall not use portions of different revisions of a document). D. Vendor waiver/deviations on critical contracts. 1. Compliance with the delivery date and technical requirements of NAVSUP WSS critical repair part material contracts is expected.
As the cautionary note contained in the contract states, seller intended use of any material which is not in full compliance with the specified contract technical requirements, should be identified as an exception in advance either at the time the quotation is submitted or prior to manufacture.
Requests for delivery date extensions and waivers/deviations should be accompanied by an explanation of the cause for the delay, or the reason for the requested non-conformance with an offer of consideration in the event the contracting officer concurs with your request.
Requests for waivers/deviations should provide justification for the requested change including an evaluation which demonstrates that proposed non-conformance will not affect the quality, form, fit, or function of the part. Where a proposed alternate or replacement item is offered, supporting technical data (catalog page, drawing (S), etc.) that fully describe the proposed item shall be provided for technical evaluation.
Requests which do not contain the above information will be returned an

Clauses in this notice (23):

Item Unique Identification and Valuation (Jan 2023)
Higher-Level Contract Quality Requirement (Dec 2014)
Inspection of Supplies--Fixed-Price (Aug 1996)
Inspection and Acceptance - Short Version
Stop-Work Order (Aug 1989)
General Information-Fob-Destination
Wide Area Workflow Payment Instructions (Jan 2023)
Mandatory Use of Workflow Pro (WFP) Mod Assist Module
Value Engineering (Jun 2020)
Integrity of Unit Prices (Nov 2021)
Equal Opportunity for Veterans (DEV 2026-O0040)(Feb 2026)
Equal Opportunity for Workers with Disabilities (DEV 2026-O0040)(Feb 2026)
Transportation of Supplies by Sea (Oct 2024)
Notice of Cybersecurity Maturity Model Certification Level Requirements (Nov 2025))
Limitation of Liability--High-Value Items ($100K)(Feb 1997)
Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data-Modifications (DEV 2026-O0048)(Mar 2026))
Security Prohibitions and Exclusions (Class Deviation 2026-O0025)(Feb 2026)
Small Business Program Representations (DEV 2026-O0037)(Feb 2026)
Alternate A, Annual Representations and Certifications (Deviation 2026-O0043)(Feb 2026))
Requirements for Submission of Proposals via Electronic Media (Jan 2018)
Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data (DEV 2026-O0048)(Mar 2026))
Type of Contract (DEV 2026-O0045)(Mar 2026)
Notice of Priority Rating for National Defense, Emergency Perpardeness, and ENRGY Progam Use (April 2008))

The description continues in the official notice.

Contracting contact

[email protected] · (771) 229-0090

As published on the official notice. Ask questions in writing and before any questions deadline the notice sets.

Is your business small enough?

For NAICS 332919, a business counts as small if it has no more than 750 employees (SBA size standard). This notice is not set aside, but the size decides your small business status on it. SBA table, current as of Oct 15, 2026.

Notice history

Oct 16, 2026: Presolicitation Due Nov 30, 2026, 12:00 AM (UTC-4)

Companies that win this kind of work

Federal contractors paid for other metal valve and pipe fitting manufacturing work, who also hold Navy contracts (last 12 months): possible competitors, or partners to team with.

Bell Boeing Joint Project Office $9.7 million in this trade
Ruta Supplies Inc $5.0 million in this trade
JA Moody LLC $4.4 million in this trade
Leslie Controls, Inc. $3.4 million in this trade
Hamilton Sundstrand Corporation $1.7 million in this trade

About the buyer

The Department of the Navy awarded $132.7 billion in contracts in the last 12 months; its biggest suppliers were Electric Boat Corporation, Lockheed Martin Corporation and RTX Corporation. See what Navy is buying now.

Other Metal Valve and Pipe Fitting Manufacturing contracts right now

There are 180 open government contract opportunities in this trade (NAICS 332919), 68 posted in the last 7 days; 9% are set aside for small businesses. The agencies buying the most are Department of the Navy, Defense Logistics Agency and US Coast Guard. Most of the work with a stated place is in Maine, Maryland and Pennsylvania. A notice in this trade gives a median of 30 days from posting to deadline; this one gives 28 days.

All open other metal valve and pipe fitting manufacturing contracts