6505-00-132-5199 Gal Changes

OXYGEN, TECHNICAL

MEDICAL GRADE OXYGEN USP COMPRESSED GAS IN A CYLINDER; SIZE H, 1650 GALLON, INLET SIZE 6, CGA 540 VALVE; SUPPLIED WITH VALVE CAP AND NECK FLANGE; COMPLIES WITH UNITED STATES PHARMACOPOEDIA (USP).

SHALL BE IN ACCORDANCE WITH MIL-O-37997 DATED

18 DECEMBER 1985 EXCEPT AS FOLLOWS:

.

PARA. 2.1.1., UNDER "STANDARDS MILITARY" DELETE

ALL REFERENCE TO RR-C-901/3.
.

PARA. 2.1.1, UNDER "STANDARDS MILITARY" DELETE

ALL REFERENCE TO MIL-STD-105 AND MIL-STD-129.

ADD THE FOLLOWING:

"OTHER MILITARY

. "MEDICAL MARKING STANDARD NO. 1"

.

PARA. 2.1.2, UNDER PUBLICATIONS, DELETE

"TM-38-250" AND SUBSTITUTE "DLAI 4145.3".
.

UNDER 2.2, ADD THE FOLLOWING:

.

"ASTM INTERNATIONAL

. "D 1974 - STANDARD PRACTICE FOR METHODS OF

. CLOSING, SEALING AND REINFORCING

. FIBERBOARD BOXES

. "D 5118 - STANDARD PRACTICE FOR FABRICATION

. OF FIBERBOARD SHIPPING BOXES

"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

ASTM INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST

CONSHOHOCKEN, PA 19428-2959, WWW.ASTM.ORG.)

.

"AMERICAN NATIONAL STANDARDS INSTITUTE

. "ANSI/ASQ Z1.4 - SAMPLING PROCEDURES AND

. TABLES FOR INSPECTION BY

. ATTRIBUTES

"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

THE AMERICAN NATIONAL STANDARDS INSTITUTE, 11

WEST 42ND STREET, NEW YORK, NY 10036-8002.)"

.

PARA. 3.2.1 DELETE "AND FEDERAL SPECIFICATION

SHEET RR-901/3".
.

RENUMBER EXISTING PARA. 3.2.3 TO 3.2.3.1 AND

EXISTING PARA. 3.2.3.1 TO 3.2.3.2 AND ADD THE

FOLLOWING NEW PARA. 3.2.3:

"3.2.3 MARKING. CYLINDERS SHALL BE PERMANENTLY

MARKED BY STAMPING ON THE SHOULDER OF EACH

CYLINDER. THE MARKINGS SHALL BE NOT LESS THAN

3/16 INCH HIGH FOR CYLINDERS LESS THAN 6 INCHES

IN OUTSIDE DIAMETER AND NOT LESS THAN 3/8 INCH

HIGH FOR CYLINDERS MORE THAN 6 INCHES IN OUTSIDE

DIAMETER. IN ADDITION, EACH CYLINDER SHALL BE

PERMANENTLY MARKED WITH THE CLEAN AIR STAR IN

ACCORDANCE WITH 49 CFR, PARA. 173.34."

.
IN RENUMBERED PARA. 3.2.3.1 SPECIAL MARKINGS,
DELETE "DELETE FIRST SENTENCE ("CYLINDERS...

RR-C-901/3.") LINE 5, DELETE "POTENCY - 60

MONTHS" AND SUBSTITUTE "FILL DATE"; LINE 8,

DELETE "EXPIRATION DATE" AND SUBSTITUTE "FILL

DATE".
.

NOTE: THERE SHALL BE NO EXPIRATION DATING

ANYWHERE ON THE CYLINDER. THIS INCLUDES ANY

LABEL ON THE CYLINDER.
.

PARA. 3.3.1.1 DELETE THE WORD "EACH" IN LINES 3

AND 5 AND REPLACE WITH THE WORD "THE".
.

PARA 3.3.11 DELETE "MIL-V-2/42" AND SUBSTITUTE

"MIL-DTL-2/42" AND DELETE "MIL-V-2/41" AND

SUBSTITUTE "MIL-DTL-2/41".
.

IN PARA 4.3 INSPECTION DELETE MIL-STD-105 AND

SUBSTITUTE "ANSI/ASQ Z1.4".