Attachment 1: Statement of Work

Material Handling Equipment (MHE)

STATEMENT OF WORK

1. SCOPE

1.1. Material Handling Equipment (MHE) to support required movement of equipment and materials.

2. APPLICABLE DOCUMENTS

2.1. Issues of Publications - The following documents of the issue date in effect on the date of request for proposal form a part of this specification to the extent applicable, or as specified herein. Within the specification, they shall be referred to by their basic designation only.

2.1.1. Government

2.1.1.1.

29 CFR 1910.178

2.1.1.2.

NAVSHIPYD PTSMH INST 10490.1M

2.1.2. Nongovernment

2.1.2.1.

ANSI/ITSDF B56 (series)

2.2. Order of precedence - In the event of conflict between the text of this specification and that of the references cited above, the text of this specification shall take precedence. Nothing in this specification, however, shall supersede applicable laws or regulations unless a specific exemption has been obtained.

3. REQUIREMENTS

3.1. Table 2 will be returned with the bid submittal indicating yes or no in the checklist for compliance with each noted specification.
3.2. Bids will include technical specifications of the unit being offered, to include dimensions and capacity chart.
3.3. Unit must meet the minimum rated capacity AND required capacity at the target reach as outlined in table 2.
3.4. Bids will be evaluated as fully compliant and technically acceptable if they meet all specifications including preferred items. If no bids meet all specifications including preferred items, units meeting only the minimum requirements will be deemed acceptable.

Unit Number

Machine type

Unit 1

Telehandler
Table-1

Material Handling Equipment (MHE)

3.5. Unit Specification: Unit 1

Comply
Description

Yes

No

Type: Telehandler, minimum 12,000# rated capacity
Min. capacity on stabilizers/outriggers at target reach At 35-feet elevation/ 25-feet horizontal reach: 4,000# (See diagram-1) Max stowed length (carriage to rear of machine): 22-feet Max width with stabilizers deployed: 13-feet
Forks: MAX Width: 6”, MAX thickness: 2.5”,
MIN Length: 48” (60” length preferred)
Power type: Internal Combustion
Shall be no older than 5 years
Foam filled, solid pneumatic, shaped solid, or equivalent tires that do not require air, and are capable of sustaining a puncture without loss of integrity or stability of the unit.
Enclosed cab with heat, air conditioning, and operator cooling fan Hydraulic side-shift carriage preferred
Hydraulic fork positioners preferred
Integral lifting attachment points for crane lifting the unit with a standard 4legged sling. Lifting and handling sketch/instructions will be provided with the