Attachment 16: Sodium Bisulfite Specification
Updated
A PDF document (73 KB) attached to Wastewater Pretreatment Plant Operation and Maintenance Services, from the Bureau of Engraving and Printing. Due Oct 27, 2026, 12:00 PM (UTC-4).
File name: Att 16 - Sodium Bisulfite Specification.pdf
The full file is for paid members, or buy this bid alone.
Preview
Attachment 16
SPECIFICATION FOR SODIUM BISULFITE
(a)
SCOPE AND CLASSIFICATION
This specification covers Sodium Bisulfite 38% by weight in an aqueous solution. At the time of delivery, it shall be largely free of priority pollutants and impurities. It shall be no less than 38% by weight Sodium Bisulfite in an aqueous solution, free of all contaminates and shall meet the chemical and physical properties listed below.
(b)
PRODUCT SPECIFICATIONS
PROPERTY
Color
Physical State
Molecular Weight
Chemical Formula
Odor
Specific Gravity
Solubility in Water (weight %)
pH
Boiling Point
Vapor Pressure
Evaporation Rate
Flash Point
(c)
REQUIREMENT
Yellow
Liquid
104.06
NaHSO3
Pungent Sulfur Dioxide
1.33 (for a 38% solution)
100%
4.3 -> 4.6
104 ° Celsius
Estimated 78 mm Hg @ 20 ° Celsius
<1
Not Flammable
RELATIVE ENVIRONMENTAL CONDITIONS
A safety data sheet of the product shall be forwarded by the Supplier and received by the Bureau of Engraving and Printing two weeks before the first delivery and upon any material changes. The following specifications, standards and handbooks form a part of this document to the extent specified herein.
(1)
Certification of Compliance with Environmental and Safety Regulations
Certificates are required to show that the material complies with the following regulations:
a.
40 CFR 720 – Pre-manufacture Notification: Premanufacture Notification Requirements and Review Procedures.
Page 1 of 3 Pages
Attachment 16
(2)
b.
40 CFR 761 - Polychlorinated Biphenyl (PCB's)
Manufacturing, Processing, Distribution in Commerce, and use Prohibitions.
c.
40 CFR Part 268, Subpart B - Schedule for Land Disposal Prohibitions and Establishments of Treatment Standards.
d.
Superfund Amendment and Reauthorization Act (SARA),
Title III.
e.
Test Methods for Evaluation of Solid Waste; EPA Procedure 1030 and Number 7420 SW - 846, Third Edition, November, 2004.
f.
District of Columbia Air Pollution Control Act of 1984. (Copies may be obtained from the District of Columbia Office of Documents, Room 523, the District Building, Washington, D.C. 20004.)
g.
District of Columbia Rules and Regulations - Title 8 - Health regulations, Chapter 2, Part 7. (Published by the Office of Air and Water Quality, Environmental Control Division,
Department of Consumer and Regulatory Affairs,
Government of the District, 510 Overlook Avenue, S. W., Washington, D. C. 20032.)
h.
California's "Safe Drinking Water and Toxic Enforcement Act" of 1986. Request for copies should be addressed to the
The beginning of the document. Download the full file to read on.
Other documents in this bid
- WWPP Solicitation
- Attachment 10: PWPP Equipment List
- Attachment 12: EHS Requirements for Purchased Materials
- Attachment 13: Restricted Materials at DCF
- Attachment 14: Bentonite Specification
- Attachment 15: Sulfuric Acid Specification
- Attachment 17: Filter Aid Specification
- Attachment 18: Sodium Hydroxide Specification
- Attachment 19: Sodium-Sulfated Castor Oil Specification
- Attachment 2: WSWPP Process Description
- Attachment 20: Boxes - Lids Specification
- Attachment 21: Pallets Specification