Attachment 2: DOL Wage Determination WY

"General Decision Number: WY20260043 07/30/2026

State: Wyoming

Construction Types: Heavy and Highway

Counties: Wyoming Counties of Natrona

Heavy Construction
Highway Construction

Modification Number

Publication Date
01/02/2026
05/18/2026
06/18/2026
07/30/2026

SAWY2026-001 05/01/2026

Rates

TRUCK DRIVERS: GROUP 2 DUMP TRUCK DRIVER (14 TO 45

CY.); FLAT RACK MATERIAL TRUCK DRIVER (OVER 5

TONS); LOW BOY & TANDEM AXLE FLOAT DRIVER; MULTIPLE

AXLE TYPE TRUCK (SEMI); WINCH TRAILER TRUCK DRIVER;

WATER TRUCK DRIVER (OVER 3,600 GAL.); OIL

DISTRIBUTOR DRIVER ( OVER 3,600 GAL.); TRUCK

TRUCK DRIVERS: GROUP 1 ""A"" FRAME TRUCK DRIVER;

CORING MACHINE (SELF PROPELLED); DUMP TRUCK DRIVER

(TO AND INCLUDING 13 CY.); FLAT RACK MATERIAL TRUCK

DRIVER (TO 5 TONS); FUEL SERVICE TRUCK DRIVER; GANG

TRUCK DRIVER; GRAVEL SPREADER; GREASEMAN, TIREMAN,

SERVICEMAN; OIL DISTRIBUTOR DRIVER (TO & INCLUDING

3,600 GAL.); SNOW PLOW DRIVER (THE CY. RATE OF THE

TRUCK); TRANSIT MIX OR WET MIX TRUCK DRIVER;

UTILITY WINCH TRUCK DRIVER; WATER TRUCK DRIVER (TO

POWER EQUIPMENT OPERATORS: GROUP 3 DRAGLINES,
CRANES, PILEDRIVERS & TRUCK MOUNTED CRANES (MFG.

RATING: 3.5 CY. OR LARGER, AND/OR 50 TONS AND

LARGER ALL ATTACHMENTS); FRONT END LOADERS (10 CY.
& LARGER); HEAVY DUTY MECHANIC; MACHINE DOCTOR;
WELDER; HOIST OPERATOR (TWO OR MORE DRUMS, SHAFTS,
OR RAISES); MOTOR PATROL OPERATOR (FINISH);

ROTO-MILLING MACHINE (8 FT. & LARGER); MIXER

POWER EQUIPMENT OPERATORS: GROUP 2 ARTICULATED ROCK

TRUCK (ALL CAPACITY); ASPHALT PLANT OPERATOR;

BACKHOE, EXCAVATOR & SHOVEL (6 CY. & LARGER); BATCH

PLANT OPERATOR; BITUMINOUS LAYDOWN MACHINE

Fringes

11.21

5.79

11.21

OPERATOR; CONCRETE BATCH PLANT OPERATOR; CONCRETE

FINISH MACHINE OPERATOR; CONCRETE SPREADER & PAVER

OPERATOR; CONCRETE MULTI BLADE SPAN SAW (HUNT

PROCESS); CRUSHER OPERATOR; DOZER OPERATOR (ALL

SIZES & POWER ATTACHMENTS); DRILLING MACHINE,
INTEGRATED (ALL TYPES); DRAGLINES, CRANES,

PILEDRIVER & TRUCK MOUNTED CRANES (MFG RATING: LESS

THAN 3.5 CY. AND/OR LESS THAN 50 TONS ALL

ATTACHMENTS); FRONT END LOADERS (1.5 TO & INCLUDING

10 CY.); HYDRO-TYPE CRANE (TO 50 TONS); MIXER

OPERATOR, CONCRETE (OVER 1 YD.); MOTOR PATROL

OPERATOR (ALL EXCLUDING FINISH); MULCHING MACHINE

OPERATOR; OILER (CRANE & SHOVELS); PAVEMENT

BREAKER, HYDRO-TAMPER & SIMILAR; ROLLER OPERATORS,

ASPHALT (STEEL & PNEUMATIC); ROTO-MILLING MACHINE

(UNDER 8 FT. WIDE); SCRAPER EQUIPMENT (ALL TYPES

AND SIZES); SCREED OPERATOR; TRENCHING MACHINE

POWER EQUIPMENT OPERATORS: GROUP 1 SKID STEER (ALL