Attachment 2: Major Fire Alarm System Components

Intrusion Alarm Systems | Conettix D6600 Communications Receiver/Gateway

Conettix D6600 Communications
Receiver/Gateway
www.boschsecurity.com

The Conettix D6600 Communications Receiver/
Gateway with Conettix IP hardware components works
in the following configurations:
• Telephone line communications over the public
switched telephone network (PSTN).
• Internet or intranet communications over a LAN or
WAN using standard user datagram protocol and
internet protocol (UDP/IP).
• Simultaneous PSTN and LAN or WAN
communications.

The Conettix network environment reduces signalreporting time, improves security, and provides instant notification when a site experiences communication
problems. A D6600 with Conettix IP hardware is
compatible with most manufacturer’s fire and security
system control panels.
System overview
PSTN communications configuration
This configuration uses existing telephone lines. A
control panel's signal transmits over a PSTN analog
telephone line to the D6600. The D6600 translates the

u

32 lines for public switched telephone network
(PSTN) communications with Two Way audio, Caller
ID, ANI and DNIS support

u

Award winning VOIP compensation feature reduces
signal errors caused by digitally distorted Contact ID
signals

u

Up to 3,200 network accounts for IPv6 and IPv4
network communications

u

Supports NIST-FIPS197 certified 128 to 256 bit AES
encryption

u

Designed with electrically isolated, hot-swappable
line cards and front panel access to CPU card

signal to a common data format and sends the signal
through Ethernet LAN, WAN, or RS-232 to a central
station automation system.
Internet or intranet communications configuration
This configuration requires Conettix IP hardware
components, uses existing Internet or intranet
structures, and avoids additional telephone service
costs.
This configuration permits the Conettix D6200
Programming/Administration Software to connect to
the D6600 remotely. A control panel's signal transmits
over the LAN or WAN to the D6600. The D6600
translates the signal to a common data format and
sends the signal through Ethernet LAN, WAN, or
RS-232 to a central station automation system. The
central automation system sends information to
operator workstations.
Conettix D6200 programming/administration
software
Conettix D6200 Programming/Administration Software
is a PC-based application that allows users to view,