Draft WPPD2601 West Point India White Coat July 17 2026 Womens

FINAL DRAFT w/ Updated Final measurements

INCH-POUNDS

WP-PD-26-01

17 July 2026

PURCHASE DESCRIPTION

COAT, INDIA WHITE, WOMEN’S

This purchase description is approved for use by the United States Military Academy (USMA).

1. SCOPE

1.1 Scope. This purchase description covers the requirements for an India White Coat constructed with a polyester/ cotton twill cloth and is intended to be worn by Women in the Corps of Cadets at the United States Military Academy (USMA) at West Point. 1.2 Classification. The Coat will be available in the following sizes: 1.2.1 Sizes.
Size

X-Short (XS)
X
X
X
X
X
X
X
X
X
X
X

WOMEN’S SIZES

Length
Short (S)
Regular (R)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X

Long (L)
X
X
X
X
X
X
X
X
X
X
X

X-Long (XL)
X
X
X
X
X
X
X
X
X
X
X

Comments, suggestions, or questions on this document should be addressed to: Department of the U.S. Army, DEVCOM - Soldier Center, ATTN: FCDD-SCD-PEC, 10 General Greene Avenue, Natick, MA 01760-5019, and the Cadet Uniform Factory, 687 Hardee Place, West Point, NY, 10996, ATTN: ASCE-LWP-CU.

AMSC N/A

FSC 8410

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

WP-PD-26-01

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

COMMERCIAL ITEM DESCRIPTIONS

A-A-50198 - Thread, Buttonhole Gimp
A-A-50199 - Thread, Polyester Core, Cotton or Polyester-Covered

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-B-1563

- Buttons, Insignia and Findings (U.S.M.A), General Specification For MIL-DTL-1563/6 - Insignia, U.S.M.A., Button, Ball, 25 Ligne MIL-DTL-1563/7 - Insignia, U.S.M.A., Button, Ball, 36 Ligne