Drawing - 0.0085 Pocket Depth-cladding MITR
Updated
A PDF document (63 KB) attached to MITR Chemically Milled Plate, from the Department of Energy. Due Dec 4, 2026, 4:00 PM (UTC-8).
File name: Drawing - 0.0085_Pocket_Depth-cladding_MITR_(1).pdf
The full file is for paid members, or buy this bid alone.
Preview
B
B
40.095±.005
2.25±.005
4x R1.49
6.07±.005
.0085
22.387±.005
A
R.002
DETAIL A
A
18 GAUGE
SCALE 5 : 1
1. INTENTIONALLY LEFT BLANK
NOTE: BREAK ALL SHARP EDGES
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
DATE
PROJECT:
DRAWN BY: Fiona Gailey
07/20/2026
STANDARD TOLERANCES: INCHES
APRROVED BY: Taylor Mason
08/06/2026
LENGTH
.0 = ±.1
.00 = ±.01
.000 = ±.005
.0000 = ±.005
REVIEWED BY: Dustin Clelland
08/06/2026
SURFACE FINISH
RMS
µ in
MATERIAL:
WEIGHT:
6061 Alloy
ANGULAR ± 0.5
THIRD ANGLE PROJECTION
0.90 lb
PART NUMBER:
MITR PLATE
SAP NUMBER:
C66T03V0
XXXXX
REV.
TITLE:
0.0085" POCKET DEPTH - CLADDING
5. RINSE WITH DEIONIZED WATER TO REMOVE CHIPS AND OTHER CONTAMINANTS, FOLLOWED BY A WIPE WITH
DENATURED ALCOHOL
A
SCALE: 1:5
SHEET 1 OF 1
SIZE
B
The beginning of the document. Download the full file to read on.