Drawing - 0.0145 Pocket Depth-cladding MITR
Updated
A PDF document (63 KB) attached to MITR Chemically Milled Plate, from the Department of Energy. Due Dec 4, 2026, 4:00 PM (UTC-8).
File name: Drawing - 0.0145_Pocket_Depth-cladding_MITR.pdf
The full file is for paid members, or buy this bid alone.
Preview
B
B
40.095±.005
2.25±.005
6.07±.005
.0145
22.387±.005
4x R1.49
A
R.002
DETAIL A
SCALE 5 : 1
18 GAUGE
A
A
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL. 3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
NOTE: BREAK ALL SHARP EDGES
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
PROJECT:
MITR PLATE
07/20/2026
STANDARD TOLERANCES: INCHES
APRROVED BY: Taylor Mason
08/06/2026
LENGTH
.0 = ±.1
.00 = ±.01
.000 = ±.005
.0000 = ±.005
REVIEWED BY: Dustin Clelland
08/06/2026
MATERIAL:
PART NUMBER:
SURFACE FINISH
RMS
µ in
WEIGHT:
6061 Alloy
ANGULAR ± 0.5
THIRD ANGLE PROJECTION
0.87 lb
SAP NUMBER:
C66T01V0
XXXXX
REV.
TITLE:
0.0145" POCKET DEPTH - CLADDING
5. RINSE WITH DEIONIZED WATER TO REMOVE CHIPS AND OTHER CONTAMINANTS, FOLLOWED BY A WIPE WITH
DENATURED ALCOHOL
DATE
DRAWN BY: Fiona Gailey
SCALE: 1:5
SHEET 1 OF 1
SIZE
B
The beginning of the document. Download the full file to read on.