Drawings
Updated
A PDF document (1.0 MB) attached to Full and Open Opportunity for MK68 Spare and Repair Parts Fabrication IAW the attached NAVSEA Drawing, SOW, and ALL additional attachments. Provide your Cage Code on the Quote and Submit the Cost Breakdown Spreadsheet., from the Department of the Navy. Due Nov 4, 2026, 11:00 AM (UTC-6).
File name: A04 DWG 8905593.pdf
The full file is for paid members, or buy this bid alone.
Preview
REVISIONS
CUI
NOTES:
F
ZONE
LTR
DESCRIPTION
DATE
-
ORIGINAL ISSUE
APPROVED
1. DIMENSIONING, TOLERANCING, AND CONTROL SYMBOLS PER ASME Y14.5-2018
2. PER NASM33537 THE TOP EDGE OF ALL INSERTS SHALL BE INSTALLED 0.75 PITCH TO 1.5
PITCH BELOW TOP SURFACE OF THE TAPPED HOLE. PITCH = 1 / THREAD PER INCH UNLESS
OTHERWISE SPECIFIED.
3. AFTER INSTALLATION OF INSERTS. REMOVE TANGS.
(M101D)
4. ANODIZE ALL OVER IAW MIL-PRF-8625: TYPE II, CLASS 1, NO SEAL. ALL DIMENSIONS AND
TOLERANCES APPLY AFTER ANODIZE. INSTALL FIND NUMBERS 2 THRU 11 AFTER ANODIZE
AND BEFORE PAINT.
5. APPLY PAINT, FIND NUMBER 12, IAW MANUFACTURER'S INSTRUCTIONS, APPLYING 5 - 7 MILS (M102D)
OF PAINT TO SURFACES INDICATED. ALLOW SURFACE TO DRY IAW MANUFACTURER'S
INSTRUCTIONS BEWTEEN COATS. DO NOT PAINT INSIDE DRILLED HOLES, TAPPED HOLES,
THREADED INSERTS OR ANY SURFACE INDICATED NOT TO PAINT. DIMENSIONS AND
TOLERANCING APPLY BEFORE PAINT.
F
E
E
D
D
C
C
AR 12
MIL-DTL-24441/23
FORM 153 / TYP 3
PAINT, DARK GREY
EPOXY, PARTS A & B
MIL-DTL-24441/23
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
LOCKING HELICAL COIL
INSERT
CRES
NASM21209
CRES
NASM21209
CRES
NASM21209
CRES
NASM21209
CRES
NASM21209
CRES
NASM21209
MS21209C0825
MS21209C0810L
MS21209C0410L
MS21209F4-10L
MS21209F1-15L
MS21209C0610L
B
MS21209F1-10L
MS21209F6-10L
MS21209F5-10L
MS122168
HELICAL COIL INSERT
CRES
53711-8905593-1
QTY PER
ASSY
CONTROLLED BY: DEPT. OF NAVY
CONTROLLED BY: PMS 495
CUI CATEGORY: CTI
DISTRIBUTION STATEMENT: D
PoC: ERIC GONZALEZ, (202) 781-1560
WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE
EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE
22, U.S.C., SEC. 2751, et. Seq.) OR THE EXPORT ADINISTRATION ACT OF
1979, AS AMENDED, (TITLE 50, U.S.C., APP. 2401 et. Seq.). VIOLATIONS
OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL
PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DoD
DIRECTIVE 5230.25.
DESTRUCTION NOTICE - CLASSIFIED INFORMATION, DESTROT IN
ACCORDANCE WITH THE SECNAV M-5510.36, DoN INFORMATION
SECURITY PROGRAM OR DoD 5220.22-M , NATIONAL INDUSTRIAL
SECURITY PROGRAM OPERATING MANUAL. UNCLASSIFIED LIMITED
DOCUMENTS, (e.g. FOUO, DISTRIBUTION STATEMENT CONTROL),
DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF
CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
NASM21209
CRES
NASM21209
CRES
NASM21209
53711
8905593-1
End Cap, Mod1
AL 6061-T651
SAE AMS 4027P
(C1D)
FIND
NO.
CAGE
NO.
PART NO. OR
IDENTIFYING NO.
NOMENCLATURE OR
DESCRIPTION
The beginning of the document. Download the full file to read on.