Exhibit 7 Definitions

EXHIBIT 7: Definitions
General Program
The work specified in this specification shall be in accordance with all Federal, State, county and city laws, codes, and ordinances and shall follow the more stringent of them. In addition to compliance with these laws, the Contractor shall follow all applicable standard industry practices including, but not limited to, the Occupational Safety and Health Act (OSHA) and National Institute of Building Sciences (NIBS).
Above Standard Services
Above Standard Services are services not covered in the monthly price of the contract. Contractor prices include all applicable labor, materials, supplies, training/certifications, equipment (except as otherwise provided), supervision, and management. Acceptance
The term constitutes acknowledgment that the supplies or services required in the contact conform to applicable contract quality and quantity requirements.
Approval
‘Approval’ means the Government has reviewed the submittals, deliverables, or administrative documents [e.g., insurance certificates, Safety Data Sheets (SDS)], and has determined that the documents conform to contract requirements. Government approval shall not relieve the Contractor of responsibility for complying with Federal, State, and local laws and regulations.
Area Types
Area type refers to specific categories of spaces within the facility that require different approaches to cleaning and maintenance. These distinctions outline unique cleaning requirements, frequencies, and standards due to their respective functions, level of traffic, or other requirements.
Blackwater
Blackwater is contaminated wastewater from restroom toilets or restrooms that contain feces and urine. Buffing
A method of gloss maintenance using a soft pad and a low speed (175 RPM) rotary floor machine. Building
A reference to ‘facility’ and ‘site’ is interchangeable with ‘building.’ A man-made structure or edifice which services are performed within or on the exterior of the formation and is intended to support or shelter any use or continuous occupancy. Burnishing
A method of high-speed gloss maintenance that uses various buffing/burnishing pads in conjunction with a high-speed (1500+ RPM) buffing machine. Also referred to as high-speed buffing. Clean
The surface is visibly free from dust, dirt, fingerprints, grease, grime, rust, spots, stains or smudges. The surface must be free from all foreign substances. In restrooms, particularly, “clean” means all surfaces must be free of organic material, feces, urine