Metal Decking Specifications 460-26-004

SECTION 05 31 00STEEL DECKING

GENERAL

SUMMARY

Section Includes:
Single pan fluted metal form deck supporting concrete fill as roof substrate. Corrugated metal form deck supporting concrete fill as roof substrate. Single pan fluted metal roof deck as roof substrate.
Acoustic metal roof deck as roof substrate.
RELATED work

Section 01 81 13. SUSTAINABLE CONSTRUCTION REQUIREMENTS. Section 05 21 00, STRUCTURAL STEEL FRAMING: Structural Steel Shapes. Section 09 06 00, SCHEDULE FOR FINISHES: Color.
Section 09 91 00, PAINTING: Finish Painting.

APPLICABLE PUBLICATIONS

Comply with references to extent specified in this section. AISI - American Iron and Steel Institute.
S10016Specification for the Design of Coldformed Steel Structural Members. American Welding Society (AWS):
D1.1/D1.1M20Structural Welding Code - Steel.
1.3/D1.3M18 Structural Welding Code - Sheet Steel.
ASTM International (ASTM):
A36/A36M19Standard Specification for Carbon Structural Steel. A653/A653M20Standard Specification for Steel Sheet, ZincCoated (Galvanized) or ZincIron AlloyCoated (Galvannealed) by the HotDip Process. A1008/A1008M20Standard Specification for Steel, Sheet, ColdRolled, Carbon, Structural, HighStrength LowAlloy, HighStrength LowAlloy with Improved Formability, Solution Hardened, and Baked Hardenable. C42317Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method. E11920Standard Test Methods for Fire Tests of Building Construction and Materials. FM Global (FM):
12815Wind Design.
Factory Mutual Research Approval Guide.
Master Painters Institute (MPI):
No. 18Primer, Zinc Rich, Organic.
Military Specifications (Mil. Spec.):
MILP21035B Paint, High Zinc Dust Content, Galvanizing Repair. Steel Deck Institute (SDI):
No. 3107Design Manual for Composite Deck, Form Decks, and Roof Decks.

UL LLC (UL):

Listed Online Certifications Directory.
580Tests for Uplift Resistance of Roof Assemblies.

SUBMITTALS

Submittal Procedures: Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES. All items indicated below are required submittals requiring Contracting Officer’s Representative (COR) review and approval. Submittal Drawings:
Show layout, connections to supporting members, anchorage, sump pans, accessories, deck openings and reinforcements. Show similar information necessary for completing installation as shown and specified, including supplementary framing, ridge and valley plates, cant strips, cut openings, special jointing or other accessories.