NP NER PMS BMS FY24 details adv
Updated
A PDF document (5.5 MB) attached to Northeast Region Pavement and Bridge Preservation Construction - NP NER PMS BMS FY24(1), from the Federal Highway Administration. Due Dec 1, 2026, 2:00 PM (UTC-5).
File name: NP NER PMS BMS FY24(1)_details_adv.pdf
The full file is for paid members, or buy this bid alone.
Preview
NPS PMIS No. 340691A/340695A/340726A/340727A/341534A/341187A/341540A/341189A/341190A/341192A
SHEET
PROJECT
NUMBER
NP NER PMS BMS FY24(1)
B01
NOTES:
1. Install fiber rolls for inlet protection as directed by the CO. See Detail E157-04.
2. Patch surface according to Asphalt Concrete
Pavement Patch Typical Section and seal/fill cracks
according to Detail E414-01 prior to applying
pavement preservation treatment.
3. Protect all curbs, sidewalks, manholes, water valves, and all other appurtenances during all pavement
preservation treatment operations.
4. Remove pavement markings or other deleterious
materials prior to placing pavement preservation
treatment. Waterborn pavement markings may
remain if less than 50% coverage as approved by
the CO.
5. Do not disturb existing loop detectors or count
stations within project limits.
6. Limit work to the footprint of the existing pavement.
[B01 (Chip Seal)]
See Road Inventory Reports For Roadway or Surface Dimensions
Match existing
cross slope
M:\PROJECTS\nps_ner\NP NER PMS BMS FY24(1)\HWY_DES\CADD\Std-Det\B01-B03_PVT_PRES_TYP.dgn 9:21 AM
12 August 2026
C
L
See Note 3
Match existing
cross slope
Existing ground (typ.)
Limits of disturbance
PAVEMENT PRESERVATION TYPICAL SECTION
CHIP SEAL, TYPE 1C
Chip Seal,Type 1C
Emulsified Asphalt
Existing asphalt pavement
Existing asphalt surface
Existing aggregate base
NO.
DATE
BY
REVISIONS
U.S. DEPARTMENT OF TRANSPORTATION
FEDERAL HIGHWAY ADMINISTRATION
OFFICE OF FEDERAL LANDS HIGHWAY
TYPICAL SECTIONS
NOT TO SCALE
Sheet 1 of 5
NPS PMIS No. 340691A/340695A/340726A/340727A/341534A/341187A/341540A/341189A/341190A/341192A
SHEET
PROJECT
NUMBER
NP NER PMS BMS FY24(1)
B02
NOTES:
1. Install fiber rolls for inlet protection as directed by the CO. See Detail E157-04.
2. Patch surface according to Asphalt Concrete
Pavement Patch Typical Section and seal/fill cracks
according to Detail E414-01 prior to applying
pavement preservation treatment.
3. Protect all curbs, sidewalks, manholes, water valves, and all other appurtenances during all pavement
preservation treatment operations.
4. Remove pavement markings or other deleterious
materials prior to placing pavement preservation
treatment. Waterborn pavement markings may
remain if less than 50% coverage as approved by
the CO.
5. Do not disturb existing loop detectors or count
stations within project limits.
6. Limit work to the footprint of the existing pavement.
[B02 (Chip Seal 2C)]
See Road Inventory Reports For Roadway or Surface Dimensions
The beginning of the document. Download the full file to read on.