Request for Information Responses
Updated
A Word document (89 KB) attached to Project: 459-27-004 ACC MOD 2 Renovation, from the Department of Veterans Affairs. Due Nov 24, 2026, 3:00 PM (UTC-8).
File name: 36C26126Q1295 RFI Responses_.docx
The full file is for paid members, or buy this bid alone.
Preview
36C26126Q1295
RFI Questions and Responses
ACC Modular 2 Renovation
RFI #1 – Please confirm how VA will allow contractor to exhaust negative air exhaust to exterior of building? Cut out wall, specific window, etc? Is this for bidding and planning purposes for all bidders? Response: Please refer to Appendix A below for interior exhaust of negative pressure air. Appendix A: Alternative To Outdoor Exhaust Requirements This Appendix provides an equivalent ICRA control measure to requirements detailed in this VHA ICRA template (Table 5 Level III, item 5) that would allow interior construction space exhaust. Interior Construction Space Exhaust:
If the facility is not able to exhaust to the building exterior, the Healthcare Environment and Facilities program office has identified an alternate industry-recognized standard interior exhaust procedure that is accepted as providing an equivalent level of infection prevention and control (IPC), and safety. The alternate interior exhaust procedure is implemented by completing the following: a. If exhaust is directed indoors, then the system must be HEPA filtered. Maintain .01 inches water gauge negative pressurization of the entire workspace by use of HEPA exhaust. These control measures must be maintained continuously 24/7 for the duration of the project. b. Prior to start of work, including assembly of the ICRA barriers, initial baseline air sampling measurements for particulate levels must be taken in the planned area of discharge. Once containment is erected and completed, HEPA filtration must then be verified by particulate measurement, using a particle counter with multi-channel capabilities to measure down to 0.3 microns, to confirm that the discharge of the HEPA unit does not exceed the baseline particulate count of the area to which the exhaust is directed. Verification must continue at least once per 8 hour shift when there is construction activity. Any exceedance must trigger a work stoppage and an immediate response and resolution. All particulate measurements, including the baseline measurement, must be documented and retrievable. c. To accommodate the sampling, the negative air pressure machine must be fitted with a 2 ft section of rigid ductwork at the discharge. The sample port for monitoring must be in the rigid ductwork section. d. Vapor generating processes must be assessed and appropriate filtration must be installed to mitigate transmission to the facility. e. Engineering must do a complete flow and pressure analysis and document the area to which the air is being discharged to ensure the flow and pressure relationships in that area are not being adversely impacted by the additional flow. Ideally, this is done as part of the construction package to ensure the design is implementable and no additional HVAC changes are required to accommodate the exhaust from the negative air equipment.
The beginning of the document. Download the full file to read on.