Section J-01 Detail Specifications for Buoy Crane

PROJECT PECULIAR DOCUMENT FOR USCG-HSC-L

PPD-589-001

DETAIL SPECIFICATION FOR BUOY CRANE

PURCHASE SPECIFICATION FOR BUOY CRANE

TO BE USED ON C.G. HSC-L VESSEL

1.0

SCOPE

1.1. This document sets forth the requirements for purchase of a buoy crane for an icebreaking CG buoy tender. Requirements include: design selection, performance verification,
documentation, manufacture, testing, inspection, preservation, packaging, packing and marking of crane.

2.0

APPLICABLE DOCUMENTS

2.1. DOCUMENT AVAILABILITY - To obtain the referenced documents see section 6.
2.2. GOVERNMENT DOCUMENTS - The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the documents listed here by number and date shall be those in the current Department of Defense Single Stock Point of Specifications and Standards (DoDSSP) and supplements thereto.

2.3. SPECIFICATIONS

None

2.4. STANDARDS

None
2.5. OTHER GOVERNMENT DOCUMENTS - The following documents form a part of this specification to the extent specified herein.

The documents listed shall be by title and effective date, unless otherwise documented.

2.6. DRAWINGS

2.6.1. None

2.7. SPECIFICATIONS

2.7.1. COAST GUARD SPECIFICATION, D-000-0100 Dated 10/91 REV

G 02/06, Bar Coding for USCG Procured Material.

2.8. TECHNICAL PUBLICATIONS

2.8.1. None

2.9. COMMERCIAL DOCUMENTS - The following documents form a part of this specification to the extent specified herein. The documents listed here shall be the version listed by number and date from the referenced industry organization. Commercial documents may also be listed in the Department of Defense Index of Specifications and Standards (DODISS).

2.9.1. American Petroleum Institute (API)

a. Specification 2C Offshore Pedestal-mounted Crane, 8th Edition, Dated 2020.
2.9.2. American National Standards Institute (ANSI)/ National Conference of Standards Laboratories (NCSL)
a. ANSI/NCSL Z540-1-1994 DATED 1994, General Requirements for Calibration Laboratories and Measuring and Test
Equipment.
2.9.3. American Society for Quality Control (ASQC)
a. ANSI/ASQC Q9003-1994, DATED 1994, Quality Systems
Model for Quality Assurance in Final Inspection and Test. 2.10. ORDER OF PRECEDENCE - In the event of a conflict between the text of this specification and the references cited herein, this specification shall take precedence.
3.0

REQUIREMENTS

3.1. GENERAL

3.1.1. The crane shall be a commercially available, knuckle boom design. The proposed model must have a documented