Section J-13D ATCH 085-002 3D TDP

HSC-L

3D Product Drawings and Associated Lists

CDRL 085-002

HSC-L

TDP Option Selection Worksheet
3D Model

HSC ACQUISITION PROGRAM (CG-SEA-A8)

USCG HEADQUARTERS

2703 MARTIN LUTHER KING JR. AVENUE SE

WASHINGTON, D.C., 20593

Distribution Statement A: Approved for public release; distribution is unlimited.

CDRL 085-002

HSC-L

3D Product Drawings and Associated Lists

SYSTEM: HSC-L

A. CONTRACT NO.
TBD

CDRL 085-002

TDP OPTION SELECTION WORKSHEET

B. EXHIBIT/ATTACHMENT

NO.

DATE PREPARED: 06/12/2026

C. CLIN

-0003AA, -0003AB, -0003AC

D. CDRL DATA ITEM NO.
085-002

1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in block 5.

B. REMARKS:

A. ☐ CONCEPTUAL LEVEL

☐ DEVELOPMENTAL LEVEL

☒ PRODUCT LEVEL

2. TYPE AND FORMAT (X all that apply and complete as applicable.) A. ☐ TYPE 2D: 2D DRAWINGS(describe in detail in remarks below or in block 11): ☐
☐
☐
☐

NATIVE 2D CAD (SPECIFY TYPE):

ISO 32000 PDF

HARD COPY

OTHER FORMAT (SPECIFY TYPE):

REMARKS :

B. ☒ TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11): ☒
☐
☒
☐
☐

NATIVE 3D CAD (SPECIFY TYPE): A s d e t e r m i n e d b y t h e C o n t r a c t o r . 3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.). NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (STEP AP 242:2022, Edition 3). 2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.).

OTHER FORMAT (SPECIFY TYPE):

*NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.

REMARKS :

A. ☐ CONTRACTOR CAGE & DOCUMENT NUMBERS

3. CAGE CODE AND

☒ GOVERNMENT CAGE & DOCUMENT NO. (COMPLETE 3B, 3C, AND 3D)

DOCUMENT NUMBERS

B. USE CAGE CODE:

C. USE DOCUMENT NUMBERS:

D. TO BE ASSIGNED BY:

See 3.C.
SOW Section 085, and COMDINST M9085.1
See 3.C.
4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable)

☐ GOVERNMENT FORMAT

☒ CONTRACTOR FORMAT

REMARKS: SOW Section 085, and COMDINST M9085.1
5. TDP ELEMENTS REQUIRED (X all that apply )

☐ ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR OR

THE FOLLOWING ARE REQUIRED:

☐ CONCEPTUAL ENGINEERING DESIGN DATA

☐ DEVELOPMENTAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☒ PRODUCT ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ COMMERCIAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ SPECIAL INSPECTION EQUIPMENT (SIE) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ SPECIAL TOOLING ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ SPECIFICATIONS

☐ SOFTWARE DOCUMENTATION

☐ SPECIAL PACKAGING INSTRUCTIONS (SPI) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS