Site Visit Appendix C Draft Rd Mtce Specifications

Cowboy Hat Cut-to-Length Stewardship IRSC

Lake Tahoe Basin Management Unit
Lake Tahoe Basin

DRAFT APPENDIX C

C(T)5.31# – ROAD MAINTENANCE REQUIREMENTS. (9/04) Contractor shall maintain roads in accordance with the following Contract Road Maintenance Requirements Summary:

PRE HAUL

ROAD

All
Temporary
Roads

TERMINI

FROM

TO

Beginning

End

MILES

T-802

Approx.
1.4

ROAD MAINTENACE T-SPECIFICATIONS

T-803 T-804 T-805 T-806 T-807 T-808

C

C

C

T-809

C

DURING HAUL

All
Temporary
Roads

TERMINI

FROM

TO

Beginning

End

MILES

T-802

ROAD MAINTENACE T-SPECIFICATIONS

T-803 T-804 T-805 T-806 T-807 T-808

AF
T

ROAD

Approx.
1.4

C

C

C

T-809

C

POST HAUL

All
Temporary
Roads

TERMINI

FROM

TO

Beginning

End

MILES

Approx.
1.4

T-802

ROAD MAINTENACE T-SPECIFICATIONS

T-803 T-804 T-805 T-806 T-807 T-808

C

C

C

R

ROAD

D

Notes:
C = Contractor Performance Item
The maximum volume of Contractor responsibility for Slide and Slump repair is 20 cubic yards

Revised 10.18.2022

C

T-809

C

Cowboy Hat Cut-to-Length Stewardship IRSC

Lake Tahoe Basin Management Unit
Lake Tahoe Basin

ROAD MAINTENANCE T-SPECIFICATIONS FOR STEWARDSHIP CONTRACTS

Contractor shall maintain roads in accordance with the following Contract Road Maintenance Requirements Summary:

T-SPECIFICATIONS

Definitions
Slide and Slump Repair
Ditch Cleaning
Surfacing Blading
Surfacing Repair
Drainage Structures
Dust Abatement
Roadway Vegetation
Miscellaneous Structures
Waterbars
Barriers
Drainage Excavation

D

R

T-800
T-801
T-802
T-803
T-804
T-805
T-806
T-807
T-808
T-809
T-810
T-814

SPECIFICATION TITLE

AF
T

T-SPEC NUMBER

Revised 10.18.2022

Cowboy Hat Cut-to-Length Stewardship IRSC

Lake Tahoe Basin Management Unit
Lake Tahoe Basin

SPECIFICATION T-800 DEFINITIONS

Wherever the following terms or pronouns are used, the intent and meaning shall be interpreted as follows: 800-1.1—Agreement—Maintenance projects require a mutually acceptable method to resolve the problems which arise when incompatible situations arise between drawings and specifications and actual conditions on the ground to allow orderly and satisfactory progress of the maintenance. These specifications have been developed in anticipation of those problem areas and have provided that such changes will be by Agreement.
It is intended that drawings and specifications will govern unless "on-the-ground" conditions warrant otherwise, when specifications call for "Agreement", "agreed", or "approval" such Agreement or approval