Specifications Unedited UFGH 21 22 00.00 40
Updated
A PDF document (96 KB) attached to 2-STEP SEALED BID - TINKER AFB WWYK250019 Remove and Replace Fire Sprinkler in Plasma Booth Dust Collectors and Replace the Building F/A System, B3221, from the Department of the Air Force. Due Oct 30, 2026, 2:00 PM (UTC-5).
File name: 250019_Spec Unedited UFGH 21 22 00.00 40.pdf
The full file is for paid members, or buy this bid alone.
Preview
**************************************************************************
NATIONAL AERONAUTICS
AND SPACE ADMINISTRATION
Preparing Activity:
NASA
UFGS-21 22 00.00 40 (November 2023)
-----------------------------------Superseding
UFGS-21 22 00.00 40 (May 2016)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated October 2023 **************************************************************************
SECTION TABLE OF CONTENTS
DIVISION 21 - FIRE SUPPRESSION
SECTION 21 22 00.00 40
CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
PART 1
GENERAL
1.1
REFERENCES
1.2
SUBMITTALS
1.3
QUALITY CONTROL
1.3.1
Special Hazards Suppression Systems
1.3.2
Previous Product Installation
PART 2
PRODUCTS
2.1
SYSTEM DESCRIPTION
2.1.1
Installation Drawings
2.1.2
Design Requirements
2.1.3
Equipment Approval
2.1.4
Performance Requirements
2.1.4.1
Time-Delay Occupied Spaces
2.2
EQUIPMENT
2.3
COMPONENTS
2.3.1
Piping
2.3.1.1
Pipe Hangers And Supports
2.3.1.2
Pipe Sleeves
2.3.2
Escutcheons
2.3.3
Supervisory Switch
2.3.3.1
Low Pressure Alarm Switch
2.3.4
Control Panel
2.3.4.1
Secondary Power Supply
2.3.4.1.1
Storage Batteries
2.3.4.1.2
Battery Charger
2.3.5
Manual Actuation Stations
2.3.6
Smoke Detectors
2.3.6.1
Air Sampling Detectors
2.3.6.2
Ionization Detectors
2.3.6.3
Photoelectric Detectors
SECTION 21 22 00.00 40
2.3.6.4
Detector Spacing and Location
2.3.7
Inhibit Switch
2.3.8
Alarm Signaling Devices
2.3.8.1
Audible Alarms
2.3.8.2
Visual Alarms
2.3.9
Main Annunciator
2.3.9.1
Annunciation Zones
2.3.9.2
Annunciator Panels
2.3.10
Automatic Fire-Smoke Dampers
2.3.11
Electromagnetic Door Holder Release
2.4
ACCESSORIES
2.4.1
Electrical Work
2.4.1.1
Wiring
2.4.1.2
Operating Power
2.4.1.3
Conductor Identification
PART 3
EXECUTION
3.1
INSTALLATION
3.1.1
Warning Signs
3.1.1.1
Inside Control Room
3.1.1.2
Protected Space
3.1.1.3
Manual Activation or Release Station
3.1.2
System Control
3.1.2.1
Controls
3.1.2.2
Suppression System Safing/Disconnect Switch
3.1.3
Electrical Work
3.1.4
Operating Instructions
3.1.5
Field Painting
3.2
FIELD QUALITY CONTROL
3.2.1
Manufacturer's Field Service
3.2.2
Test Procedure
3.2.3
Preliminary Tests
3.2.4
Formal Tests
3.3
CLOSEOUT ACTIVITIES
3.3.1
Record Drawings
-- End of Section Table of Contents --
The beginning of the document. Download the full file to read on.