Statement of Work

PR # 61200PR2700055532

STATEMENT OF WORK

STATEMENT OF WORK (SOW)

FOR
Steadman Fire Alarm Panel Repair

1.0 GENERAL

1.1 BACKGROUND

U.S. Coast Guard (USCG) Training Center (TRACEN) Petaluma located at 599 Tomales Road Petaluma; CA 94952 is the Coast Guard’s largest West Coast Training Center. Our graduates are the latest chefs, medics, storekeepers, yeoman, information systems technicians, electronics technicians, operations specialists, and aviation survival technicians (AST). We are also home to the Coast Guard Leadership Development Center’s Chief Petty Officer Academy.

1.2 SCOPE

The requirement of this contract is for the contractor to furnish all labor, qualified personnel, tools, materials, equipment, supplies, services, and other items necessary to troubleshoot and correct an ongoing fire-alarm ground-fault condition on the Siemens XLS FireFinder at USCG TRACEN Petaluma.

1.3 OBJECTIVE

The Contractor shall furnish all supervision, qualified personnel, diagnostic equipment, tools, materials, transportation, and incidentals required to troubleshoot, trace, repair, and fully restore the affected fire-alarm field circuit to normal operating condition, eliminating the active groundfault condition on the Siemens FireFinder-XLS system at the U.S. Coast Guard (USCG) Training Center (TRACEN) Petaluma, located at 599 Tomales Road, Petaluma, CA 94952.

1.4 APPLICABLE DOCUMENTS

1.4.1 Reference Documents

The following documents may be helpful to the Contractor in performing the work described in this document:
• NFPA 72 (National Fire Alarm and Signaling Code)
• NFPA 70 (National Electrical Code - NEC)

2.0 SPECIFIC REQUIREMENTS/TASKS

2.1 TASK ONE. FIRE-ALARM PANEL TROUBLESHOOTING AND DIAGNOSTICS

• Diagnose and correct the ongoing fire-alarm ground fault panel condition on the Siemens XLS FireFinder.
• Inspect the fire-alarm control panel, associated power supplies, batteries, modules, wiring terminations, and connected field circuits as necessary to identify the source of the fault condition.

2.2 TASK TWO. FIELD-CIRCUIT TESTING AND REPAIR

• Trace, test, and isolate the affected fire-alarm field wiring and devices to identify the location and cause of the issue.
• Repair, replace, reconnect, or re-terminate defective field wiring, connections, or related components necessary to restore the affected circuit to proper operation.

LAST UPDATED: 11/13/2026

PR # 61200PR2700055532

STATEMENT OF WORK

•

Furnish sufficient compatible fire-alarm wiring and associated repair materials to complete corrective repairs during the service visit if the fault is confirmed in the field