Home / FCC Terre Haute Bus Center Roof and Paint Materials NOV FY27 / Document

Statement of Work-THX Bus Center Roof (UPDATED)

Updated

A PDF document (339 KB) attached to FCC Terre Haute Bus Center Roof and Paint Materials NOV FY27, from the Federal Prison System / Bureau of Prisons. Due Nov 20, 2026, 11:00 AM (UTC-5).

File name: SOW-THX_Bus Center Roof (UPDATED).pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

FEDERAL BUREAU OF PRISONS

FCC TERRE HAUTE

SEAL AND COAT NATIONAL BUS CENTER ROOF

I. MATERIALS & GENERAL REQUIREMENTS

A. INTRODUCTION & GENERAL REQUIREMENTS

1.

The Federal Bureau of Prisons (FBOP), Federal Correctional Complex – Terre Haute (FCC Terre Haute) requires the supply and delivery of commercial-grade roof cleaning, priming, and elastomeric coating products.

2.

BOP staff will utilize these materials to clean, prime, seal, and coat the existing corrugated metal roof system on the National Bus Center (34,000 sq. ft.) and its two outbuildings (3,800 sq. ft. each). The project will achieve a fully waterproof, highly reflective elastomeric membrane across the cumulative 41,600 square foot footprint.

3.

All products must be commercial-grade, chemically compatible as an integrated system, and comply with IBC, UL, and NFPA standards.

B. SCOPE

1.

The vendor shall supply and deliver the exact material quantities and specific tools detailed in this specification to the FCC Terre Haute warehouse.

2.

The vendor is responsible for ensuring all items are delivered free of damage, completely palletized, and accompanied by all required technical submittals and safety documentation.

3.

This contract is a supply-only procurement. No installation, field labor, or construction services are included or authorized.

C. MATERIAL SPECIFICATIONS

1.

The part numbers listed below establish the baseline standard of quality, material volume, and system compatibility. "Or equal" products will be evaluated if they meet or exceed the listed physical and functional salient characteristics.

Item

Product Description /
Part Reference

Required
Quantity

Packaging
/ Unit

Technical Specifications & Salient
Characteristics

All Klean Ultra
Biodegradable Cleaner
(AKU100-5 or Equal)

30 Pails (150

Gals Total)

5-Gallon
Pail

Industrial-grade, water-based, biodegradable
metal cleaner; formulated to remove surface
contaminants without leaving a soap residue.

Acrylic Epoxy Metal
Primer - Gray
(AWMP100-5 or Equal)

40 Pails (200

Gals Total)

5-Gallon
Pail

Rust and corrosion-inhibiting water-based
primer; engineered for high adhesion to
sharp corrugated metal edges and
boundaries.

Seal Kote Ultra Base Coat
(SKU100-5 or Equal)

50 Pails (250

Gals Total)

5-Gallon
Pail

Elastomeric, waterproof fluid-applied base
coat designed for direct application over
primed metal surfaces.

Poly-Fab Reinforcement
Fabric (SPF100-6 or
Equal)

75 Rolls

6" x 300'
Roll

Stitch-bonded polyester mesh; provides high

The beginning of the document. Download the full file to read on.

Other documents in this bid