Supplement Option Selection Worksheet

TDP OPTION SELECTION WORKSHEET

SYSTEM: NAVY ELECTRONIC CHARTING DISPLAY

INFORMATION SYSTEM (ECDIS) AN/SYN-1 HARDWARE SET

A. CONTRACT NO.

B. EXHIBIT / ATTACHMENT

NO.
N00024-25-R-5246
A

1.
A.

DATE PREPARED: 24OCT2025

A.

CLIN

0010,1010,2010,3010,4010

B.

CDRL DATA ITEM

NO(S)
A025

TDP LIFECYCLE LEVEL (CHOOSE ONLY ONE PER WORKSHEET) Note: The level selected must coincide with the requirements of the elements selected in Block 5.

B. REMARKS:

☐CONCEPTUAL LEVEL

☐DEVELOPMENTAL LEVEL

☒PRODUCTION LEVEL

2.

DELIVERABLE DATA PRODUCTS (X ALL THAT APPLY AND COMPLETE AS APPLICABLE)

TYPE

A.

☒2D DRAWINGS

B.

3D DRAWINGS

FORMAT

☐3D Digital MODELS ONLY
☒3D Digital MODELS W/

ASSOCIATED 2D DRAWINGS

C.

☐METADATA

(Specify in Section 9)

D.

☒ASSOCIATED

LISTS (See Sect 7)

E.

☒ NATIVE CAD

☒ ISO 32000 PDF

☐ HARD COPY

☒ MODEL ORGANIZATION SCHEMA (Specify Appendix B or other) APPENDIX B

☒ OTHER FORMAT (SPECIFY, e.g., 3D PDF, JT) 3D PDF

☐ ASCII TEXT- PIPE DELIMITED ☐ ISO 10303 (SPECIFY, e.g., APxxx & DEX)

☒ NATIVE FORMAT

☒ ISO 32000 PDF

☐ HARD COPY

OTHER (SPECIFY, e.g., PDF) SEE BLK 9

_

SUPPLIMENTAL

☒ TECHNICAL DATA

(Specify in Section 9)
3.

CAGE CODE & DOCUMENT

NUMBERS

B.

USE CAGE CODE:

53711

4.

DRAWING FORMATS (X ONE AND COMPLETE AS APPLICABLE)

☒ CONTRACTOR FORMAT

C.

A.

☐CONTRACTOR CAGE CODE & DOCUMENT NUMBERS

☒GOVERNMENT CAGE (COMPLETE 3B, 3C AND 3D)

USE DOCUMENT NUMBERS:

To Be Assigned

D.

TO BE ASSIGNED

BY:

PEO IWS 6.0

☐ GOVERNMENT FORMAT

5.

TDP ELEMENTS AND ASSOCIATED DATA REQUIRED (X ALL THAT APPLY)

☒ CONCEPTUAL DESIGN DRAWINGS / MODELS

☒ DEVELOPMENTAL DESIGN DRAWINGS / MODELS AND ASSOCIATED LISTS

☒ PRODUCT DRAWINGS / MODELS AND ASSOCIATED LISTS

☒ SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS, MODELS AND ASSOCIATED LISTS

☒ SPECIFICATIONS AND/OR STANDARDS (SPECIFY) PRIME ITEM DEVELOPMENT SPECIFICATION (PIDS) _

☒ SOFTWARE DOCUMENTATION (SPECIFY) FIRMWARE (IF EXCLUDED FROM PIDS)

_

☒ SUPPLEMENTAL TECHNICAL DATA (SPECIFY) SEE BLK 9

_

6.

TDP DATA MANAGEMENT PRODUCTS

☒ SOURCE CONTROL DRAWING (SOCD) APPROVAL REQUEST

☒ DRAWING NUMBER ASSIGNMENT REPORT

☒ PROPOSED CRITICAL MANUFACTURING PROCESS DESCRIPTION

7.

ASSOCIATED LISTS (X AND COMPLETE AS APPLICABLE)

A.

PARTS LISTS (X ONE)

B.

DATA LISTS

☒ REQUIRED (Specify Levels of Assy) ALL LEVELS

_

C.

INDEX LISTS

☒ REQUIRED (Specify Levels of Assy) ALL LEVELS

_

D.

WIRING LISTS

☒ REQUIRED (Specify Levels of Assy) ALL LEVELS

_

E.

APPLICATION LISTS

F.

OTHER

8.

APPLICABILITY OF STANDARDS. THE FOLLOWING STANDARDS APPLY (X AS APPLICABLE)

☐ (1) INTEGRAL

☒ (2)

☐ (3) CONTRACTOR SELECT

SEPARATE

☐ (1) INTEGRAL

☒ (2)

☐ (3) CONTRACTOR SELECT

SEPARATE

☒ ASME Y14.100