TDP Option Selection Worksheet (CLB Dockside Handler)
Updated
A PDF document (267 KB) attached to Towed Array Transporter and Dockside Handling, from the Department of the Navy. Due Nov 20, 2026, 4:00 PM (UTC-5).
File name: 20260803 - TDP Option Selection Worksheet (CLB Dockside Handler).pdf
The full file is for paid members, or buy this bid alone.
Preview
MIL-STD-31000B
TDP OPTION SELECTION WORKSHEET
SYSTEM:
A. CONTRACT NO.
B. EXHIBIT/ATTACHMENT
NO.
DATE PREPARED:
C. CLIN
D. CDRL DATA ITEM NO.
1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in block 5.
B. REMARKS:
A.
CONCEPTUAL LEVEL
DEVELOPMENTAL LEVEL
✔
PRODUCT LEVEL
2. TYPE AND FORMAT (X all that apply and complete as applicable.) A.
✔
TYPE 2D: 2D DRAWINGS(describe in detail in remarks below or in block 11): ✔
ISO 32000 PDF
HARD COPY
REMARKS :
B.
TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11): 3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.). NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. STEP AP203, AP 214 etc.). 2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.).
*NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.
REMARKS :
A.
3. CAGE CODE AND
CONTRACTOR CAGE & DOCUMENT NUMBERS
✔ GOVERNMENT CAGE & DOCUMENT NO. (COMPLETE 3B, 3C, AND 3D)
DOCUMENT NUMBERS
B. USE CAGE CODE:
C. USE DOCUMENT NUMBERS:
D. TO BE ASSIGNED BY:
AS ASSIGNED
50225
B. GERSHMAN, CODE 1534
4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable) ✔
CONTRACTOR FORMAT
GOVERNMENT FORMAT
REMARKS:
5. TDP ELEMENTS REQUIRED (X all that apply )
ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR
OR THE FOLLOWING ARE REQUIRED:
CONCEPTUAL ENGINEERING DESIGN DATA
DEVELOPMENTAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS
✔ PRODUCT ENGINEERING DESIGN DATA AND ASSOCIATED LISTS
COMMERCIAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS
SPECIAL INSPECTION EQUIPMENT (SIE) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS
SPECIAL TOOLING ENGINEERING DESIGN DATA AND ASSOCIATED LISTS
SPECIFICATIONS
SOFTWARE DOCUMENTATION
SPECIAL PACKAGING INSTRUCTIONS (SPI) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS
QUALITY ASSURANCE PROVISIONS (QAPs)
6. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable) ✔
✔
ASME Y14.100
ASME Y14.24 TYPES AND APPLICATIONS OF
ENGINEERING DRAWING
ENGINEERING DRAWINGS
✔
PRACTICES
ASME Y14.34 ASSOCIATED LISTS
✔
WITH APPENDICES:
ASME Y14.35 REVISION OF ENGINEERING
DRAWINGS AND ASSOCIATED DOCUMENTS
B
C
D
E
✔
ASME Y14.41 DIGITAL PRODUCT DEFINITION
Company stds permitted? Y/N
DATA PRACTICES
✔
ASME Y14.5 DIMENSIONING AND TOLERANCING
OTHER STANDARDS APPLY AS
DESCRIBED:
Source: http://assist.dla.mil -- Downloaded: 2019-06-19T21:17Z Check the source to verify that this is the current version before use.
The beginning of the document. Download the full file to read on.