002in-Shim MITR
Updated
A PDF document (57 KB) attached to HIP CAN Study, from the Department of Energy. Due Nov 9, 2026, 4:00 PM (UTC-8).
File name: 0.002in-Shim_MITR.pdf
The full file is for paid members, or buy this bid alone.
Preview
B
B
40.095±.005
6.07±.005
4x R1.49
.0020 REF
A
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL. 3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT
SERIAL NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
A
NOTE: BREAK ALL SHARP EDGES
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
DATE
DRAWN BY: Fiona Gailey
06/11/2026
STANDARD TOLERANCES: INCHES
APRROVED BY: Taylor Mason
08/06/2026
LENGTH
.0 = ±.1
.00 = ±.01
.000 = ±.005
.0000 = ±.005
REVIEWED BY: Dustin Clelland
08/06/2026
SURFACE FINISH
RMS
µ in
MATERIAL:
1018 Steel
ANGULAR ± 0.5
THIRD ANGLE PROJECTION
WEIGHT:
0.14 lb
PROJECT:
MITR PLATE
PART NUMBER:
SAP NUMBER:
C67T03V0
XXXXX
REV.
TITLE:
0.002" THICKNESS - SHIM
SCALE: 1:5
SIZE
B
SHEET 1 OF 1
The beginning of the document. Download the full file to read on.