Thick Foil MITR
Updated
A PDF document (55 KB) attached to HIP CAN Study, from the Department of Energy. Due Nov 9, 2026, 4:00 PM (UTC-8).
File name: 0.015 Thick Foil_MITR.pdf
The full file is for paid members, or buy this bid alone.
Preview
B
B
22.375±.005
2.082±.040
.027±.001
A
A
NOTE: BREAK ALL SHARP EDGES
1. INTENTIONALLY LEFT BLANK
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
DATE
PROJECT:
DRAWN BY: Fiona Gailey
07/20/2026
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
STANDARD TOLERANCES: INCHES
APRROVED BY: Taylor Mason
08/06/2026
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL TRANSFER LABEL OR BUYER APPROVED EQUAL.
LENGTH
.0 = ±.1
.00 = ±.01
.000 = ±.005
.0000 = ±.005
REVIEWED BY: Dustin Clelland
08/06/2026
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT
SERIAL NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
SURFACE FINISH
RMS
µ in
ANGULAR ± 0.5
THIRD ANGLE PROJECTION
MATERIAL:
U-10Mo CORE
0.001" Zr COAT
WEIGHT:
1.06 lb
MITR PLATE
PART NUMBER:
SAP NUMBER:
A23T01V0
XXXXX
REV.
TITLE:
0.015" THICK - FOIL
SIZE
B
SCALE: 1:4
SHEET 1 OF 1
The beginning of the document. Download the full file to read on.