10Gabottom MITR
Updated
A PDF document (58 KB) attached to HIP CAN Study, from the Department of Energy. Due Nov 9, 2026, 4:00 PM (UTC-8).
File name: 10Gabottom_MITR.pdf
The full file is for paid members, or buy this bid alone.
Preview
B
B
40.095±.005
6.07±.005
R1.49
A
R.135
10 GAUGE
A
DETAIL A
SCALE 4 : 1
A
NOTE: BREAK ALL SHARP EDGES
1. SPRAY NEOLUBE 1.1 ON ALL SURFACES UNLESS OTHERWISE NOTED PER MANUFACTURER’S DIRECTIONS, BAKE ALL PARTS PER MANUFACTURER’S INSTRUCTIONS.
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL. 3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL TRANSFER LABEL OR BUYER APPROVED EQUAL.
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
PROJECT:
06/08/2026
STANDARD TOLERANCES: INCHES
APRROVED BY: Taylor Mason
08/06/2026
LENGTH
.0 = ±.1
.00 = ±.01
.000 = ±.005
.0000 = ±.005
REVIEWED BY: Dustin Clelland
08/06/2026
SURFACE FINISH
RMS
µ in
ANGULAR ± 0.5
THIRD ANGLE PROJECTION
MATERIAL:
WEIGHT:
ASTM A1008
9.13 lb
PART NUMBER:
MITR PLATE
SAP NUMBER:
C63T01V0
XXXXX
REV.
TITLE:
10 GAUGE BOTTOM - STRONG BACK
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
DATE
DRAWN BY: Fiona Gailey
SCALE: 1:5
SHEET 1 OF 1
SIZE
B
The beginning of the document. Download the full file to read on.