Attachment 13 -Metpar Care and Maintenance

460 T. Elmer Cox Drive, Greeneville, TN USA 37743
Tel: 516-333-2600 Fax: 516-333-2618 URL= http://www.Metpar.com E-mail; [email protected]

GENERAL CARE & MAINTENANCE

POWDER SHIELD and Dur-A-Tex™

TOILET PARTITIONS and SHOWERS

The finish of the material is a baked epoxy hybrid coating, similar to an automotive finish. To clean it, wash with warm water and mild soap, rinse and dry with a soft cloth. To maintain the high quality finish, we recommend waxing with an automotive type product.

Under no circumstances should any of the following be used; Abrasive powders or pads, any cleaner containing chlorine or chlorine agents, water closet cleansers, ceramic tile cleansers, solutions containing more than 1% by volume of ammonia, solutions containing acids or lye, solutions containing enzymes.
Should there be any deviation from these guidelines Metpar will not accept responsibility for product failure.

GENERAL CARE & MAINTENANCE

STAINLESS STEEL TOILET PARTITIONS and SHOWERS

Routine cleaning; use soap, ammonia or detergent and water. Sponge the surface with a cloth, then rinse with clear water and wipe dry.
Smears & fingerprints; use Arcal 20, Lac-O-Nu, Lumin Wash, O'Cedar Cream Polish or Stainless Shine. Rub the surface with a cloth as directed on the package.
Stubborn spots, stains & other light discolorations; use Allchem Concentrated Cleaner Samae, Twinkle, Camaeo Copper Cleaner, Grade FFF Italian Pumice Whiting, Steel Bright, Lumin Cleaner, Zud, Retoro, StaClean, Highlite Cooper's Stainless Steel Cleaner, Revere Stainless Steel Cleaner. Apply with a damp sponge or cloth. Then rinse with clear water and wipe dry. Or... You can also use Household cleansers such as Old Dutch, Lighthouse, Sunbrite, Wyandotte, Bab-O, Gold Dust, Sapolio, Bon Ami or Comet. For these household cleansers, rub with a damp cloth. They may contain chlorine bleaches, so rinse thoroughly after use and wipe dry. Or... You can also use Liquid NuSteel, Paste NuSteel or Dubois Temp. For these products, rub the surface with a dry cloth using only a small amount of cleanser. Rinse with water and dry. Heat tint or heavy discoloration; use Penny-Brite, Copper Brite, Paste Nu-Steel, Dubois Temp or Tarnite and rub onto surface with a dry cloth. Or... You can also use Revere Stainless Steel Cleaner, Allen Polish, Steel Bright, Wyandotte, Bab-O or Zud. For these cleansers, apply with a damp sponge or cloth, rinse thoroughly and wipe dry.
Tenacious deposits, discoloration, industrial atmospheric stains; use Oakite No 33 Dilac, Texo NY, FlashKlenz, Caddy Cleaner, Turco Scale 4368 or Permag 57. Swab and soak with a clean cloth. Let stand 15