Home / Administrative Parking Lot Repairs / Document

Attachment 5: C06 416 Specifications Administrative parking lot repairs

Updated

A PDF document (208 KB) attached to Administrative Parking Lot Repairs, from the Forest Service. Due Dec 1, 2026, 2:00 PM (UTC-5).

File name: Attachment 5 C06 416 Specifications Administrative parking lot repairs.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

SECTION-416 ASPHALT PAVEMENT SEALCOAT

Description
416.01 This work shall consist of the application of pavement sealing material(s) on existing pavement surfaces .
416.02 Conform to the following Subsections:
Emulsified asphalt
Water

702.03
725.01(c)
Construction Requirements

416.03 Composition of Seal Material. The primary component of seal materials shall be slow setting asphalt emulsion that conforms to either AASHTO M140 or M208. The contractor shall submit a manufacturer’s certificate of compliance with each shipment of asphalt emulsion. Asphalt emulsions shall be mixed with additives that prevent bleeding. The contractor may dilute seal materials with water to improve penetration into the pavement surface or for consistency improvement. Additive Materials: Materials such as clays, slates, fibers, carbon black and polymers may be added to emulsified asphalt provided the manufacturer’s product literature is reviewed and approved by the CO prior to application. If the seal material is blended with sand, the sand shall be clean, hard, durable, uncoated particles, free from clay lumps and organic matter, with 100 percent passing the No. 16 mesh and a maximum of 5 percent passing the No. 200 mesh. The sand must have a gradation that helps control segregation and promotes suspension during product application. No more than 3 pounds of sand shall be added to each gallon of applied material.
Top Dressing and Blotter Sand: Washed concrete sand meeting AASHTO M6 gradation requirements, unless otherwise approved.
Submit proposed emulsion mix for approval 14 days prior to production. 416.04 Equipment The distribution equipment for all materials shall be capable of placing a uniform consistency of the material, and be capable of applying a uniform application over variable widths, grades and crowns of surface. Self propelled, asphalt distributor, squeegee or slurry seal spreader box, and hand-held spray and squeegee equipment or any combinations thereof maybe required to obtain a satisfactory seal. The required application rate may also require multiple applications to obtains a satisfactory, uniformily, sealed surface. The equipment used for storing and application of liquid and slurry products shall include accurate volume measuring devices and calibrated tank. The CO may require transport or application equipment to be weighed when full and empty if volume measuring equipment is inadequate.
416.05 Surface Preparation Clean the existing surface to be sealed of all loose material, dirt, dust, oil

The beginning of the document. Download the full file to read on.

Other documents in this bid