C-2 2D TDP Option Selection Worksheet

RB-S III

2D Product Drawings and Associated Lists

Section C Attachment 2

RB-S III

TDP Option Selection Worksheet
2D Drawings

BOAT ACQUISITION PROGRAM (CG-SEA-A5)

USCG HEADQUARTERS

2703 MARTIN LUTHER KING JR. AVENUE SE

WASHINGTON, D.C., 20593

RB-S III

SYSTEM: RB-S III

A. CONTRACT #

70Z02326R93250001

2D Product Drawings and Associated Lists

Section C Attachment 2

TDP OPTION SELECTION WORKSHEET

B. EXHIBIT/ATTACHMENT #

Section C Attachment 2

DATE PREPARED: 08/26/2026

C. CLIN

1006 (OP2)

D. DELIVERABLE ITEM #

8, 29

1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in block 5.

B. REMARKS:

A. ☐ CONCEPTUAL LEVEL

Product‑level TDP in accordance with

☐ DEVELOPMENTAL LEVEL

MIL‑STD‑31000.

☒ PRODUCT LEVEL

2. TYPE AND FORMAT (X all that apply and complete as applicable.) A. ☒ TYPE 2D: 2D DRAWINGS (describe in detail in remarks below or in block 11): ☒
☒
☒
☐

NATIVE 2D CAD (SPECIFY TYPE): AutoCAD® 2025-compatible .dwg. ISO 32000 PDF ((Multi-sheet 2D PDFs extracted from Paper Space layouts.)

HARD COPY

OTHER FORMAT (SPECIFY TYPE):

REMARKS : Multi‑sheet PDFs extracted from Paper Space layouts shall fully disclose boat geometry and required dimensions without reliance on separate bend/cut/burn sheets.
B. ☐ TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11): ☐
☐
☐
☐
☐

NATIVE 3D CAD (SPECIFY TYPE):

3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.). NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. STEP AP203, AP 214 etc.). 2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.).

OTHER FORMAT (SPECIFY TYPE):

*NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.

REMARKS :

3. CAGE CODE AND

DOCUMENT NUMBERS

B. USE CAGE CODE:

See 3.C.

A. ☐ CONTRACTOR CAGE & DOCUMENT NUMBERS

☒ GOVERNMENT CAGE & DOCUMENT NO. (COMPLETE 3B, 3C, AND 3D)

C. USE DOCUMENT NUMBERS:

D. TO BE ASSIGNED BY:

See 3.C.
Per COMDTINST 9085.1 (series) and ESWBS (first 3 digits).

4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable)

☒ GOVERNMENT FORMAT

☐ CONTRACTOR FORMAT

REMARKS: USCG Standard Drawing Border Templates (SFLC standard templates) shall be used on all drawings. Template blocks shall not be modified without prior USCG authorization, except STINFO and limited‑rights markings. 5. TDP ELEMENTS REQUIRED (X all that apply )

☐ ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR OR THE

FOLLOWING ARE REQUIRED: