C-3 3D TDP Option Selection Worksheet

RB-S III

3D Product Drawings and Associated Lists

Section C Attachment 3

RB-S III

TDP Option Selection Worksheet
3D Model

BOAT ACQUISITION PROGRAM (CG-SEA-A5)

USCG HEADQUARTERS

2703 MARTIN LUTHER KING JR. AVENUE SE

WASHINGTON, D.C., 20593

RB-S III

3D Product Drawings and Associated Lists

Section C Attachment 3

TDP OPTION SELECTION WORKSHEET

SYSTEM: RB-S III

A. CONTRACT #.
70Z02326R93250001

B. EXHIBIT/ATTACHMENT #.
Section C Attachment 3

DATE PREPARED: 08/14/2026

C. CLIN

1006 (OP2)

D. DELIVERABLE ITEM #.

1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in block 5.

B. REMARKS:

A. ☐ CONCEPTUAL LEVEL

Product‑level TDP in accordance with

☐ DEVELOPMENTAL LEVEL

MIL‑STD‑31000.

☒ PRODUCT LEVEL

2. TYPE AND FORMAT (X all that apply and complete as applicable.)

A. ☐ TYPE 2D: 2D DRAWINGS(describe in detail in remarks below or in block 11): ☐
☐
☐
☐

NATIVE 2D CAD (SPECIFY TYPE):

ISO 32000 PDF

HARD COPY

OTHER FORMAT (SPECIFY TYPE):

REMARKS :

B. ☒ TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11): ☒
☐
☒
☐
☐

NATIVE 3D CAD (SPECIFY TYPE): Contractor‑selected 3D CAD format capable of STEP AP242 export 3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.). NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (SPECIFY TYPE): ISO 10303‑242:2022 (STEP AP242) 2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.).

OTHER FORMAT (SPECIFY TYPE):

*NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.

REMARKS :

A. ☐ CONTRACTOR CAGE & DOCUMENT NUMBERS

☒ GOVERNMENT CAGE & DOCUMENT NO. (COMPLETE 3B, 3C, AND 3D)

C. USE DOCUMENT NUMBERS:

D. TO BE ASSIGNED BY:

Per Section 085, COMDTINST 9085.1 (series), ESWBS List – GFI See 3.C. (first 3 digits), and USCG 3D model numbering rules.
4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable)

☐ GOVERNMENT FORMAT

☒ CONTRACTOR FORMAT

3. CAGE CODE AND

DOCUMENT NUMBERS

B. USE CAGE CODE:

See 3.C.

REMARKS:

5. TDP ELEMENTS REQUIRED (X all that apply )

☒ ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR OR THE

FOLLOWING ARE REQUIRED:

☐
☐
☐
☐
☐
☐
☐
☐
☐
☐

CONCEPTUAL ENGINEERING DESIGN DATA

DEVELOPMENTAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

PRODUCT ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

COMMERCIAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

SPECIAL INSPECTION EQUIPMENT (SIE) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

SPECIAL TOOLING ENGINEERING DESIGN DATA AND ASSOCIATED LISTS