G-ZTrafficControlPlan

Contract Name: Corral G - Z IRSC Stewardship

Page: 1

TRAFFIC CONTROL PLAN AND SPECIFICATIONS PURSUANT TO B6.33 SAFETY

Unless otherwise agreed in writing in accordance with B6.33Safety, the following measures are required to provide adequate warning of hazards for users of roads and trails adjacent to Contractor’s Operations. Part I. Signing and Other Warning Methods:
(a) Signs. The following signs are required when Contractor’s Operations are in progress adjacent to or on Forest Service controlled roads and trails:

MINIMUM LETTER

SIZE AND LEGEND

MINIMUM SIZE AND

SHAPE

WHEN AND WHERE REQUIRED

1. LOGGING

OPERATIONS

NEXT <> MILES

(4" letters)

24" x 36" (rectangle)

Min. 100 ft. outside of any continuous
work areas, on roads listed in C5.31#
and trails listed in Part II.

2. LOGGING

OPERATIONS

(4" letters)

30" x 30"(diamond)

To be used in conjunction with "Logging
Operations Next <> Miles" and where
work area is not continuous.

3. FOR LOGGING

USE ONLY

(4" letters)

30" x 30"(diamond)

Required where roads listed in C5.31#
and temporary roads intersect with
C5.31# roads. Install a cross ditch to
discourage use when sign is covered or
removed for extended periods.

4. TRUCKS

(4" letters)

30" x 30"(diamond)

At critical intersections on roads listed in
C5.31# when traffic is heavy or otherwise
exceeds volumes stated in Part II below.
Remove or cover when the sign is not
applicable.

5. END

LOGGING

OPERATIONS

(4" letters)

24" x 36" (rectangle)

Use in conjunction with "Logging
Operations Next <> Miles" and "Logging
Operations."

6. TREE

FELLING

AHEAD

(4" letters)

30" x 30"(diamond)

Required 200 feet in advance of danger
area where timber is being felled adjacent
to all roads, including temporary roads,
and trails.

7. ROAD

MACHINERY

AHEAD

(4" letters)

30" x 30"(diamond)

Required at least 200 feet in advance of
Contractor road maintenance operations
on roads listed in Schedule C5.31#.

Contract Name: Corral G -Z IRSC Stewardship

Page: 2

TRAFFIC CONTROL PLAN AND SPECIFICATIONS PURSUANT TO B6.33SAFETY (continued)

All signs shall meet requirements as specified in Parts 1 and 6 of the Manual of Uniform Traffic Control Devices (MUTCD).
Sign borders and lettering shall be black. Borders are 7/8 inch wide, inset 5/8 inch from outside Solomon of sign. All sign backgrounds shall be orange, except that signs that need to be seen both day