Reference d Test Procedure for Electrical Interface

IM-272A/WDQ Electrical Interface Test Procedure
001564 Rev. X3

IM-272A/WDQ

First Article Test Procedure
Electrical Interface
001564 Rev. X3

28 May 2020

Contract No. N00167-19-C-0005

CDRL A001

DID DI-NDTI-80603A

Unclassified

Contractor: Spectral Labs Incorporated (SLI)
15920 Bernardo Center Drive
San Diego, CA 92127

DISTRIBUTION STATEMENT C: Distribution authorized to US Government Agencies and their contractors; Administrative/Operational Use: 31 October 2019. Other requests for this document shall be referred to Naval Sea Systems Command (NAVSEA 04ND).
This document could contain technical data, the export of which is restricted by the U.S. arms export control act (AECA) (TITLE 22, U.S.C. SEC 2751, ET SEQ.) Or the export administration act of 1979, as amended (TITLE 50, U.S.C., APP.2401, ET SEQ.).

Spectral Labs 2019

DISTRIBUTION STATEMENT C: Distribution authorized to US Government Agencies and their contractors; Administrative/Operational Use: 31 October 2019. Other requests for this document shall be referred to Naval Sea Systems Command (NAVSEA 04ND).

NSWCCD

I

Record of Changes
Revision
X1
X2
X3

II

IM-272A/WDQ Electrical Interface Test Procedure
001564 Rev. X3

Change
Initial Release
Update after Gov review
Gov Review admin changes

Date
10/31/2019
01/02/2020
05/28/2020

Approval

E. Ackermann

E. Ackermann

E. Ackermann

I
II
1.0

3.9 IM-272A/WDQ – Simulated Human Body Leakage Current Tests for Personnel

Spectral Labs 2019

DISTRIBUTION STATEMENT C: Distribution authorized to US Government Agencies and their contractors; Administrative/Operational Use: 31 October 2019. Other requests for this document shall be referred to Naval Sea Systems Command (NAVSEA 04ND).

NSWCCD

1.0

IM-272A/WDQ Electrical Interface Test Procedure
001564 Rev. X3

Introduction

This document describes the Electrical Interface test for the IM-272A/WDQ Radiacmeter, Air Monitor for Radioactive Particles (radiacmeter).

1.1

Purpose of Test

The purpose of these tests are to assess the robustness of the IM-272A/WDQ electrical interface by verifying that the IM-272A/WDQ continues to function properly after a series of possible shipboard power conditions are simulated. Additionally, there are tests to help ensure safety of the IM-272A/WDQ, and a power profile test to document the power requirements of the IM-272A/WDQ.

1.2 System to be Tested

1.2.1 Nomenclature

Radiacmeter, Air Monitor for Radioactive Particles (radiacmeter)

1.2.2 Model Number

IM-272A/WDQ

1.2.3 Type of Test

First Article, Production Inspection (Human Body Leakage Test only).