Section J-13K ATCH 085-005-2 2D TDP

HSC-L

2D Product Drawings and Associated Lists

CDRL 085-005

HSC-L

TDP Option Selection Worksheet
2D Drawings

HSC ACQUISITION PROGRAM (CG-SEA-A8)

USCG HEADQUARTERS

2703 MARTIN LUTHER KING JR. AVENUE SE

WASHINGTON, D.C., 20593

Distribution Statement A: Approved for public release; distribution is unlimited.

CDRL 085-005

HSC-L

2D Product Drawings and Associated Lists

SYSTEM: HSC-L

A. CONTRACT NO.
TBD

CDRL 085-005

TDP OPTION SELECTION WORKSHEET

B. EXHIBIT/ATTACHMENT

NO.

DATE PREPARED: 06/12/2026

C. CLIN

-0003AC

D. CDRL DATA ITEM NO.
085-005

1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in block 5.

B. REMARKS:

A. ☐ CONCEPTUAL LEVEL

☐ DEVELOPMENTAL LEVEL

☒ PRODUCT LEVEL

2. TYPE AND FORMAT (X all that apply and complete as applicable.) A. ☒ TYPE 2D: 2D DRAWINGS(describe in detail in remarks below or in block 11): ☐
☐
☒
☒

NATIVE 2D CAD (SPECIFY TYPE):

ISO 32000 PDF

HARD COPY

OTHER FORMAT (SPECIFY TYPE): See BLK 6

REMARKS :

B. ☐ TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11): ☐
☐
☐
☐
☐

NATIVE 3D CAD (SPECIFY TYPE):

3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.). NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. STEP AP203, AP 214 etc.). 2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.).

OTHER FORMAT (SPECIFY TYPE):

*NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.

REMARKS :

A. ☐ CONTRACTOR CAGE & DOCUMENT NUMBERS

3. CAGE CODE AND

☒ GOVERNMENT CAGE & DOCUMENT NO. (COMPLETE 3B, 3C, AND 3D)

DOCUMENT NUMBERS

B. USE CAGE CODE:

C. USE DOCUMENT NUMBERS:

D. TO BE ASSIGNED BY:

See 3.C.
Per GFI Template, SOW Section 085, and COMDINST M9085.1 See 3.C.
4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable)

☒ GOVERNMENT FORMAT

☐ CONTRACTOR FORMAT

REMARKS: Per GFI Template, SOW Section 085, and COMDINST M9085.1 5. TDP ELEMENTS REQUIRED (X all that apply )

☐ ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR OR

THE FOLLOWING ARE REQUIRED:

☐ CONCEPTUAL ENGINEERING DESIGN DATA

☐ DEVELOPMENTAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☒ PRODUCT ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ COMMERCIAL ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ SPECIAL INSPECTION EQUIPMENT (SIE) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☐ SPECIAL TOOLING ENGINEERING DESIGN DATA AND ASSOCIATED LISTS

☒ SPECIFICATIONS

☒ SOFTWARE DOCUMENTATION

☐ SPECIAL PACKAGING INSTRUCTIONS (SPI) ENGINEERING DESIGN DATA AND ASSOCIATED LISTS